[rancid] Cisco WLC Backups

[Keys, Jeremy]

I've been searching the archives for a complete how-to on getting a
successful backup on a Cisco WLC (we're using a 5508) using Rancid. Has
anyone had any luck? I've found bits and pieces in different emails but
nothing complete.



Thanks in advance,



Jeremy







This message and accompanying documents are covered by
the Electronic Communications Privacy Act 18
U.S.C. "Sections 2510-2521," and contain information
intended for the specified individual(s) only. This
information is confidential. If you are not the intended
recipient or an agent responsible for delivering it to
the intended recipient, you are hereby notified that you
have received this document in error and that any review,
dissemination, copying, or the taking of any action based
on the contents of this information is strictly
prohibited. If you have received this communication in
error, please notify us immediately by e-mail, and delete
the original message.

[Ryan West]

Jeremy,

This is what I use with some slight modifications that the original author had in place. I think the command file could be combined into a single file for wlc 4's and 5's, but changing 'show run-config' to 'show run'.

Just call from each in rancid-fe.

-ryan

From: rancid-discuss-***@shrubbery.net [mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Keys, Jeremy
Sent: Monday, February 15, 2010 3:28 PM
To: rancid-***@shrubbery.net
Subject: [rancid] Cisco WLC Backups

I've been searching the archives for a complete how-to on getting a successful backup on a Cisco WLC (we're using a 5508) using Rancid. Has anyone had any luck? I've found bits and pieces in different emails but nothing complete.

Thanks in advance,

Jeremy








This message and accompanying documents are covered by

the Electronic Communications Privacy Act 18

U.S.C. "Sections 2510-2521," and contain information

intended for the specified individual(s) only. This

information is confidential. If you are not the intended

recipient or an agent responsible for delivering it to

the intended recipient, you are hereby notified that you

have received this document in error and that any review,

dissemination, copying, or the taking of any action based

on the contents of this information is strictly

prohibited. If you have received this communication in

error, please notify us immediately by e-mail, and delete

the original message.

[Ron Whitney]

Hi. I'm have a WLC4402 running 4.0.179.11. I'm having only mild
success getting RANCID to work. Ryan's ciscowlc5 script works better as
my WLC does not support the 'show running-config' command. In executing
'ciscowlc5 -d <device>' it appears that the 'show udi' and 'show
sysinfo' commands work properly but the 'show run-config commands'
command hangs at the 'Press Enter to continue Or <Ctl Z> to abort'
prompt. Any recommendations? Thanks in advance.

Ron


-----Original Message-----
From: rancid-discuss-***@shrubbery.net
[mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Ryan West
Sent: Tuesday, February 16, 2010 11:04
To: Keys, Jeremy; rancid-***@shrubbery.net
Subject: [rancid] Re: Cisco WLC Backups



Jeremy,



This is what I use with some slight modifications that the
original author had in place. I think the command file could be
combined into a single file for wlc 4's and 5's, but changing 'show
run-config' to 'show run'.



Just call from each in rancid-fe.



-ryan



From: rancid-discuss-***@shrubbery.net
[mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Keys, Jeremy
Sent: Monday, February 15, 2010 3:28 PM
To: rancid-***@shrubbery.net
Subject: [rancid] Cisco WLC Backups



I've been searching the archives for a complete how-to on
getting a successful backup on a Cisco WLC (we're using a 5508) using
Rancid. Has anyone had any luck? I've found bits and pieces in
different emails but nothing complete.



Thanks in advance,



Jeremy






This message and accompanying documents are covered by
the Electronic Communications Privacy Act 18
U.S.C. "Sections 2510-2521," and contain information
intended for the specified individual(s) only. This
information is confidential. If you are not the intended
recipient or an agent responsible for delivering it to
the intended recipient, you are hereby notified that you
have received this document in error and that any review,
dissemination, copying, or the taking of any action based
on the contents of this information is strictly
prohibited. If you have received this communication in
error, please notify us immediately by e-mail, and delete
the original message.