Discussion:
[rancid] [PATCH] Preliminary support for Cisco's SANOS devices
Michael Stefaniuc
2008-04-07 15:49:09 UTC
Permalink
Hello guys,

attached is a patch against 2.3.2a8 to add preliminary support for
Cisco's SANOS devices.

Idea for the patch loosely based on
http://www.shrubbery.net/pipermail/rancid-discuss/2008-March/002881.html

License: Whatever it takes to get the patch accepted upstream.

bye
michael
--
Michael Stefaniuc Tel.: +49-711-96437-199
Consulting Communications Engineer Fax.: +49-711-96437-111
--------------------------------------------------------------------
Reg. Adresse: Red Hat GmbH, HauptstÀtter Strasse 58, 70178 Stuttgart
Handelsregister: Amtsgericht Stuttgart HRB 153243
GeschÀftsfÌhrer: Brendan Lane, Charlie Peters, Michael Cunningham,
Werner Knoblich
Bilder, Jeff
2008-04-07 16:20:45 UTC
Permalink
I see there were previous posts about using rancid to grab configuration
files from Cisco's WAAS device and that it closely resembles and agm.
Has anyone been able to get this working successfully?

Thanks,

JB
Eric Girard
2008-04-07 16:42:11 UTC
Permalink
Jeff,
I had made an attempt at getting it to work, but my
RANCID/expect/TCL skills left a little to be desired. I can however
make a box available to someone who knows RANCID a little better.

Eric

Eric Girard
Systems Engineer
Focus Technology Solutions, Inc.

-----Original Message-----
From: rancid-discuss-***@shrubbery.net
[mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Bilder, Jeff
Sent: Monday, April 07, 2008 12:21 PM
To: rancid-***@shrubbery.net
Subject: [rancid] Support for Cisco's WAAS device.

I see there were previous posts about using rancid to grab configuration
files from Cisco's WAAS device and that it closely resembles and agm.
Has anyone been able to get this working successfully?

Thanks,

JB

Loading...