Josh Rivel
2007-05-21 02:15:41 UTC
Hi.
So I have rancid 2.3.2a6 setup and happily monitoring a bunch of Cisco
routers and switches. We now have an Extreme Summit 48TS running XOS
11.6.1.9 and I can't get rancid to monitor it properly.
I applied the patches to xrancid as posted by John Heasly on Friday,
August 18th 2006, but to no avail.
I can manually do a clogin with no problems, but running xrancid
192.168.1.7 yields "End of run not found". The box running rancid and
the switch are on the same subnet.
Output begins here:
***@cwlinux08:~> clogin -c "show version" 192.168.1.7
192.168.1.7
spawn ssh -c 3des -x -l admin 192.168.1.7 UNAUTHORIZED USE PROHIBITED!!!
Keyboard-interactive authentication
Enter password for admin:
ExtremeXOS
Copyright (C) 2000-2006 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388;
6,034,957; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550;
6,981,174; 7,003,705; 7,012,082.
========================================================================
======
Press the <tab> or '?' key at any time for completions.
Remember to save your configuration changes.
NYCS-SW450-ServerFarm2.1 #
NYCS-SW450-ServerFarm2.1 # show version
Switch : 800163-00-04 0702G-00028 Rev 4.0 BootROM: 1.0.2.2 IMG:
11.6.1.9
XGM2-1 :
Image : ExtremeXOS version 11.6.1.9 v1161b9 by release-manager
on Wed Nov 29 22:40:47 PST 2006 BootROM : 1.0.2.2
NYCS-SW450-ServerFarm2.2 #quit
Connection to 192.168.1.7 closed.
***@cwlinux08:~> xrancid 192.168.1.7
192.168.1.7: missed cmd(s): show configuration detail,show slot,show
configuration,show diag,show memory,show switch
192.168.1.7: End of run not found
#
--
Josh Rivel
Senior UNIX Systems Administrator
ContextWeb, Inc.
22 Cortlandt Street, 9th Floor
New York, NY 10007
917 408 6301 TEL
917 591 5277 FAX
***@contextweb.com
http://www.contextweb.com
So I have rancid 2.3.2a6 setup and happily monitoring a bunch of Cisco
routers and switches. We now have an Extreme Summit 48TS running XOS
11.6.1.9 and I can't get rancid to monitor it properly.
I applied the patches to xrancid as posted by John Heasly on Friday,
August 18th 2006, but to no avail.
I can manually do a clogin with no problems, but running xrancid
192.168.1.7 yields "End of run not found". The box running rancid and
the switch are on the same subnet.
Output begins here:
***@cwlinux08:~> clogin -c "show version" 192.168.1.7
192.168.1.7
spawn ssh -c 3des -x -l admin 192.168.1.7 UNAUTHORIZED USE PROHIBITED!!!
Keyboard-interactive authentication
Enter password for admin:
ExtremeXOS
Copyright (C) 2000-2006 Extreme Networks. All rights reserved.
Protected by US Patent Nos: 6,678,248; 6,104,700; 6,766,482; 6,618,388;
6,034,957; 6,859,438; 6,912,592; 6,954,436; 6,977,891; 6,980,550;
6,981,174; 7,003,705; 7,012,082.
========================================================================
======
Press the <tab> or '?' key at any time for completions.
Remember to save your configuration changes.
NYCS-SW450-ServerFarm2.1 #
NYCS-SW450-ServerFarm2.1 # show version
Switch : 800163-00-04 0702G-00028 Rev 4.0 BootROM: 1.0.2.2 IMG:
11.6.1.9
XGM2-1 :
Image : ExtremeXOS version 11.6.1.9 v1161b9 by release-manager
on Wed Nov 29 22:40:47 PST 2006 BootROM : 1.0.2.2
NYCS-SW450-ServerFarm2.2 #quit
Connection to 192.168.1.7 closed.
***@cwlinux08:~> xrancid 192.168.1.7
192.168.1.7: missed cmd(s): show configuration detail,show slot,show
configuration,show diag,show memory,show switch
192.168.1.7: End of run not found
#
--
Josh Rivel
Senior UNIX Systems Administrator
ContextWeb, Inc.
22 Cortlandt Street, 9th Floor
New York, NY 10007
917 408 6301 TEL
917 591 5277 FAX
***@contextweb.com
http://www.contextweb.com