[rancid] IOS XR devices not contacted for more than 24 hrs error

Discussion:

Mayibongwe Darlington Mpofu

2016-06-23 13:51:25 UTC

Hi guys

I need help with IOS XR devices that have not been contacted for more than
24 hrs.

I can run clogin and run commands on the ios xr devices and it works OK.

xrancid seems to work as well.

how ever cronjob rancid-run returns End of file not found.

On the log file l get the following error:
cvs [status aborted]: cannot open file xxx-xxx-xxx-router01 for comparing:
Permission denied
cvs [status aborted]: cannot open file xxx-xxx-xxx-router02 for comparing:
Permission denied

Trying to get all of the configs.
write(spawn_id=1): broken pipe
while executing
"send_user -- "$expect_out(buffer)""
invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*RP/0/RSP0/C([^#>\r\n]+)?[#>]($[^)\r\n]+$)?} { send_user --
"$expect_out(buffer)"
} -re {..."
invoked from within
"expect {
-re "\b+" { exp_continue }
-re "^\[^\n\r *]*$reprompt" { send_user --
"$expect_out(buffer)"
}
-re "^\[^\n\r]*$reprom..."
(procedure "run_commands" line 39)
invoked from within
"run_commands $prompt $command"
("foreach" body line 166)
invoked from within
"foreach router [lrange $argv $i end] {
set router [string tolower $router]
# attempt at platform switching.
set platform ""
send_user ..."
(file "/usr/local/rancid/bin/clogin" line 743)^M
zaf-mid-mtb-msr01: missed cmd(s): dir /all disk1a:,admin show diag,dir /all
slavedisk2:,dir /all sec-slot2:,dir /all disk1:,dir /all sec-nvram:,show
diag chassis-info,dir /all disk2:,dir /all sec-bootflash:,dir /all
slaveslot2:,dir /all disk0:,show install active,dir /all compactflasha:,dir
/all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all
slavenvram:,dir /all sec-disk2:,dir /all sec-disk0:,dir /all harddiskb:,dir
/all slavedisk1:,admin show env all,show controllers,dir /all
slavedisk0:,show debug,dir /all bootflash:,dir /all sec-slot0:,dir /all
sec-disk1:,dir /all disk0a:,dir /all slot2:,dir /all compactflash:,dir /all
harddisk:,dir /all slot0:,show vlan,dir /all slavebootflash:,dir /all
slaveslot1:,dir /all nvram:,admin show inventory raw,show redundancy
secondary,admin show variables boot,show running-config,dir /all slot1:
xxx-xxx-xxx-ruoter01: End of run not found

and

xrrancid -d zaf-mid-mtb-msr01

executing clogin -t 90 -c"terminal no-timestamp;terminal exec prompt
no-timestamp;admin show version;show redundancy secondary;show install
active;admin show env all;show diag chassis-info;admin show variables
boot;dir /all nvram:;dir /all bootflash:;dir /all compactflash:;dir /all
compactflasha:;dir /all slot0:;dir /all disk0:;dir /all disk0a:;dir /all
slot1:;dir /all disk1:;dir /all disk1a:;dir /all slot2:;dir /all disk2:;dir
/all harddisk:;dir /all harddiska:;dir /all harddiskb:;dir /all
slavenvram:;dir /all slavebootflash:;dir /all slaveslot0:;dir /all
slavedisk0:;dir /all slaveslot1:;dir /all slavedisk1:;dir /all
slaveslot2:;dir /all slavedisk2:;dir /all sec-nvram:;dir /all
sec-bootflash:;dir /all sec-slot0:;dir /all sec-disk0:;dir /all
sec-slot1:;dir /all sec-disk1:;dir /all sec-slot2:;dir /all sec-disk2:;show
controllers;admin show diag;admin show inventory raw;show vlan;show
debug;show running-config" zaf-mid-mtb-msr01
PROMPT MATCH: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#terminal no-timestamp
In FilterAll: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#terminal no-timestamp
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#terminal exec prompt
no-timestamp
In FilterAll: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#terminal exec prompt
no-timestamp
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show version
In ShowVersion: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show version
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show redundancy secondary
In ShowRedundancy: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show redundancy
secondary
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show install active
In ShowInstallActive: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show install
active
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show env all
In ShowEnv: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show env all
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show diag chassis-info
In ShowGSR: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show diag chassis-info
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show variables boot
In ShowBoot: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show variables
boot
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all nvram:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all nvram:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all bootflash:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all bootflash:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all compactflash:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all compactflash:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all compactflasha:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all compactflasha:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slot0:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slot0:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk0:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk0:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk0a:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk0a:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slot1:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slot1:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk1:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk1:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk1a:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk1a:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slot2:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slot2:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk2:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all disk2:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all harddisk:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all harddisk:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all harddiska:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all harddiska:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all harddiskb:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all harddiskb:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavenvram:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavenvram:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavebootflash:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all
slavebootflash:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slaveslot0:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slaveslot0:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavedisk0:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavedisk0:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slaveslot1:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slaveslot1:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavedisk1:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavedisk1:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slaveslot2:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slaveslot2:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavedisk2:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all slavedisk2:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-nvram:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-nvram:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-bootflash:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-bootflash:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-slot0:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-slot0:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-disk0:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-disk0:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-slot1:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-slot1:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-disk1:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-disk1:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-slot2:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-slot2:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-disk2:
In DirSlotN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#dir /all sec-disk2:
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show controllers
In ShowContAll: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show controllers
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show diag
In ShowDiag: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show diag
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show inventory raw
In ShowInventory: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#admin show
inventory raw
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show vlan
In ShowVLAN: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show vlan
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show debug
In ShowDebug: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show debug
HIT COMMAND:RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show running-config
In WriteTerm: RP/0/RSP0/CPU0:xxx-xxx-xxx-router01#show running-config
Where do l start troubleshooting. where am l going wrong with these ios xr
devices.

Regards

DarlingtonM

Mayibongwe Darlington Mpofu

2016-06-23 14:22:47 UTC

Permalink

There are some cmds that are not giving output such as" sh vlan, sh
redundancy secondary, sh diag chassis-info" could it be an issue of these
cmds failing to execute??

Rergards

DarlingtonM

On Thu, Jun 23, 2016 at 3:51 PM, Mayibongwe Darlington Mpofu <

Post by Mayibongwe Darlington Mpofu
Hi guys
I need help with IOS XR devices that have not been contacted for more than
24 hrs.
I can run clogin and run commands on the ios xr devices and it works OK.
xrancid seems to work as well.
how ever cronjob rancid-run returns End of file not found.
Permission denied
Permission denied
Trying to get all of the configs.
write(spawn_id=1): broken pipe
while executing
"send_user -- "$expect_out(buffer)""
invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*RP/0/RSP0/C([^#>\r\n]+)?[#>]($[^)\r\n]+$)?} { send_user --
"$expect_out(buffer)"
} -re {..."
invoked from within
"expect {
-re "\b+" { exp_continue }
-re "^\[^\n\r *]*$reprompt" { send_user --
"$expect_out(buffer)"
}
-re "^\[^\n\r]*$reprom..."
(procedure "run_commands" line 39)
invoked from within
"run_commands $prompt $command"
("foreach" body line 166)
invoked from within
"foreach router [lrange $argv $i end] {
set router [string tolower $router]
# attempt at platform switching.
set platform ""
send_user ..."
(file "/usr/local/rancid/bin/clogin" line 743)^M
zaf-mid-mtb-msr01: missed cmd(s): dir /all disk1a:,admin show diag,dir
/all slavedisk2:,dir /all sec-slot2:,dir /all disk1:,dir /all
sec-nvram:,show diag chassis-info,dir /all disk2:,dir /all
sec-bootflash:,dir /all slaveslot2:,dir /all disk0:,show install active,dir
/all compactflasha:,dir /all slaveslot0:,dir /all sec-slot1:,dir /all
harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all sec-disk0:,dir
/all harddiskb:,dir /all slavedisk1:,admin show env all,show
controllers,dir /all slavedisk0:,show debug,dir /all bootflash:,dir /all
sec-slot0:,dir /all sec-disk1:,dir /all disk0a:,dir /all slot2:,dir /all
compactflash:,dir /all harddisk:,dir /all slot0:,show vlan,dir /all
slavebootflash:,dir /all slaveslot1:,dir /all nvram:,admin show inventory
raw,show redundancy secondary,admin show variables boot,show
xxx-xxx-xxx-ruoter01: End of run not found
and

xrrancid -d zaf-mid-mtb-msr01

Alan McKinnon

2016-06-23 20:03:04 UTC

Permalink

This is your problem, your have permissions errors and cvs cannot do
what it needs to do. Use "find" to look for files not owned by the
rancid user.

Most common cause is running rancid as root or as yourself, cvs then
creates files that rancid cannot read

Post by Mayibongwe Darlington Mpofu
cvs [status aborted]: cannot open file xxx-xxx-xxx-router02 for
comparing: Permission denied
Trying to get all of the configs.
write(spawn_id=1): broken pipe
while executing
"send_user -- "$expect_out(buffer)""
invoked from within
"expect -nobrace -re ^H+ { exp_continue } -re {^[^
^M *]*RP/0/RSP0/C([^#>\r\n]+)?[#>]($[^)\r\n]+$)?} { send_user --
"$expect_out(buffer)"
} -re {..."
invoked from within
"expect {
-re "\b+" { exp_continue }
-re "^\[^\n\r *]*$reprompt" { send_user --
"$expect_out(buffer)"
}
-re "^\[^\n\r]*$reprom..."
(procedure "run_commands" line 39)
invoked from within
"run_commands $prompt $command"
("foreach" body line 166)
invoked from within
"foreach router [lrange $argv $i end] {
set router [string tolower $router]
# attempt at platform switching.
set platform ""
send_user ..."
(file "/usr/local/rancid/bin/clogin" line 743)^M
zaf-mid-mtb-msr01: missed cmd(s): dir /all disk1a:,admin show diag,dir
/all slavedisk2:,dir /all sec-slot2:,dir /all disk1:,dir /all
sec-nvram:,show diag chassis-info,dir /all disk2:,dir /all
sec-bootflash:,dir /all slaveslot2:,dir /all disk0:,show install
active,dir /all compactflasha:,dir /all slaveslot0:,dir /all
sec-slot1:,dir /all harddiska:,dir /all slavenvram:,dir /all
sec-disk2:,dir /all sec-disk0:,dir /all harddiskb:,dir /all
slavedisk1:,admin show env all,show controllers,dir /all
slavedisk0:,show debug,dir /all bootflash:,dir /all sec-slot0:,dir /all
sec-disk1:,dir /all disk0a:,dir /all slot2:,dir /all compactflash:,dir
/all harddisk:,dir /all slot0:,show vlan,dir /all slavebootflash:,dir
/all slaveslot1:,dir /all nvram:,admin show inventory raw,show
redundancy secondary,admin show variables boot,show running-config,dir
xxx-xxx-xxx-ruoter01: End of run not found
and

xrrancid -d zaf-mid-mtb-msr01

--
Alan McKinnon
***@gmail.com

Mayibongwe Darlington Mpofu

2016-06-27 13:08:38 UTC

Permalink

Hi

I am actually on rancid 2.3.6.

I have checked the setting, there are similar to the other IOS XR devices
that configured for the same group.

The only difference l have seen, is in the line default configuration
between the devices that are contacted by rancid and those that are not.
The working group has a access-class specified and the other does not have.

I am not sure if this does make a difference.

Regards

DarlingtonM

On Thu, Jun 23, 2016 at 3:51 PM, Mayibongwe Darlington Mpofu <

xrrancid -d zaf-mid-mtb-msr01

heasley

2016-06-27 16:54:02 UTC

Permalink

Post by Mayibongwe Darlington Mpofu
Hi
I am actually on rancid 2.3.6.

I am sorry, that is much too old. I just can't spend time supporting a
version that old. please move to 3.4.1; you may have the same problem,
but its much easier for me and folks on the list to help you.