Nate,
HP switches use hlogin instead of clogin to handle the differences in login and user interface from cisco devices. To diagnose your problem use:
/usr/local/rancid/bin/hlogin 10.211.169.218
Good luck,
Mike
-----Original Message-----
From: rancid-discuss-***@shrubbery.net [mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Nate Beck
Sent: Monday, February 18, 2008 11:35 AM
To: john heasley; rancid-***@shrubbery.net
Subject: [rancid] Re: Issue with Rancid running
I have reinstalled with 2.3.2a8 and I still get this in the logs
Trying to get all of the configs.
10.211.169.218 clogin error: Error: TIMEOUT reached
10.211.169.218: missed cmd(s): show stack,show module,show flash,show
version,show system-information,write term
10.211.169.218: End of run not found
;
=====================================
But if I run /usr/local/rancid/bin/clogin 10.211.169.218 it works just fine
please try 2.3.2a7 or a8.
Rancid 2.3.2a2
Host os RHEL5 see below
The only thing that appears in the log is this
Trying to get all of the configs.
10.211.169.218 clogin error: Error: TIMEOUT reached
10.211.169.218: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,s$
10.211.169.218: End of run not found
!
=====================================
Getting missed routers: round 1.
10.211.169.218 clogin error: Error: TIMEOUT reached
10.211.169.218: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp
chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,s$
10.211.169.218: End of run not found
!
=====================================
you havent told us what version of rancid, which host o/s, or if any errors
appeared in the log.
Post by Nate BeckI have the switch defined as hp in the router.db already. How do you
define
hlogin?
Post by Sam MunzaniNate,
define that switch as hp and use hlogin.
Thanks,
Sam
Issue with Rancid running All,
I just installed Rancid on Friday of last week on a RHEL5 box. It
currently only has 1 switch in it, a HP 2848. When I tested the clogin
it
worked fine. Then when I run rancid-run it ran fine the first time.
After
that it has timed out everytime and thrown an error. However when I run
the
command it runs fine. Has anyone ever seen something like this before?
Thanks
Nate
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
Rancid-***@shrubbery.net
http://www.shrubbery.net/mailma