[rancid] backup issues - A10s and Force10

[Craig Hopkins]

Hi,

Since updating to Debian 9.4 (rancid 3.6.2) I can a10login / clogin to my
A10 and Dell Force10 kit but the rancid runs aren't working.

The logs for Force10s is

Trying to get all of the configs.
Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) at
/usr/lib/rancid/bin/drancid line 49.

and for the A10s:

device.ip.address: End of run not found

Any suggestions?

Cheers,

Craig

[Doug Hughes]

drancid? that's interesting. I used f10rancid when I had a whole bunch
of S50, S55, S4810, C150, C300, and E600i.

Post by Craig Hopkins
Hi,
Since updating to Debian 9.4 (rancid 3.6.2) I can a10login / clogin to
my A10 and Dell Force10 kit but the rancid runs aren't working. 
The logs for Force10s is 
Trying to get all of the configs.
Can't use 'defined(%hash)' (Maybe you should just omit the defined()?)
at /usr/lib/rancid/bin/drancid line 49.
device.ip.address: End of run not found
Any suggestions?
Cheers,
Craig
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

[Craig Hopkins]

Hi,

Sorry for generating this as a new thread, but I had Digest Mode on so I
can't reply to the original.

Thanks to Doug Hughes for steering me in the right direction on the
Force10s - I'd been using "dell" as the device type, and I guess "force10"
took over from that at some point since the last time I updated. I've
changed my devices and they're now backing up.

Does anybody have a clue about the A10s? "End of run not found" is really
not helping me figure out a starting point.

Cheers,

Craig

Post by Craig Hopkins
Hi,
Since updating to Debian 9.4 (rancid 3.6.2) I can a10login / clogin to my
A10 and Dell Force10 kit but the rancid runs aren't working.
The logs for Force10s is
Trying to get all of the configs.
Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) at
/usr/lib/rancid/bin/drancid line 49.
device.ip.address: End of run not found
Any suggestions?
Cheers,
Craig

[Doug Hughes]

Send in a rancid -d on it

rancid -d -t a10 <device>

Post by Craig Hopkins
Hi,
Sorry for generating this as a new thread, but I had Digest Mode on so
I can't reply to the original.
Thanks to Doug Hughes for steering me in the right direction on the
Force10s - I'd been using "dell" as the device type, and I guess
"force10" took over from that at some point since the last time I
updated. I've changed my devices and they're now backing up. 
Does anybody have a clue about the A10s? "End of run not found" is
really not helping me figure out a starting point.
Cheers,
Craig
Hi,
Since updating to Debian 9.4 (rancid 3.6.2) I can a10login /
clogin to my A10 and Dell Force10 kit but the rancid runs aren't
working. 
The logs for Force10s is 
Trying to get all of the configs.
Can't use 'defined(%hash)' (Maybe you should just omit the
defined()?) at /usr/lib/rancid/bin/drancid line 49.
device.ip.address: End of run not found
Any suggestions?
Cheers,
Craig
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

[Craig Hopkins]

Tried that, thanks. It was trying to do show run without being in enable
mode. I hadn't made any changes to our config, so something must have
changed inside rancid.

Changing the cloginrc config resolved it, so I'm all good now.

Thanks for your help.

Cheers,

Craig

Post by Doug Hughes
Send in a rancid -d on it
rancid -d -t a10 <device>
Hi,
Sorry for generating this as a new thread, but I had Digest Mode on so I
can't reply to the original.
Thanks to Doug Hughes for steering me in the right direction on the
Force10s - I'd been using "dell" as the device type, and I guess "force10"
took over from that at some point since the last time I updated. I've
changed my devices and they're now backing up.
Does anybody have a clue about the A10s? "End of run not found" is really
not helping me figure out a starting point.
Cheers,
Craig

Post by Craig Hopkins
Hi,
Since updating to Debian 9.4 (rancid 3.6.2) I can a10login / clogin to my
A10 and Dell Force10 kit but the rancid runs aren't working.
The logs for Force10s is
Trying to get all of the configs.
Can't use 'defined(%hash)' (Maybe you should just omit the defined()?) at
/usr/lib/rancid/bin/drancid line 49.
device.ip.address: End of run not found
Any suggestions?
Cheers,
Craig

_______________________________________________
--
Doug Hughes
Keystone NAP
Fairless Hills, PA
1.844.KEYBLOCK (539.2562)
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss