But if I run -> hlogin -c 'show system' 10.1.6.254
It returns:
PC-2810-48G-01# no page
PC-2810-48G-01# show system
Status and Counters - General System Information
System Name : PC-2810-48G-01
System Contact : ***@bmr.co
System Location : Ville-St-Laurent
MAC Age Time (sec) : 300
Time Zone : 0
Daylight Time Rule : None
Software revision : N.11.25 Base MAC Addr : b439d6-042cc0
ROM Version : N.10.01 Serial Number : CN048XJ04W
Up Time : 137 days Memory - Total : 24,034,944
CPU Util (%) : 36 Free : 16,221,792
IP Mgmt - Pkts Rx : 908,669 Packet - Total : 3022
Pkts Tx : 634,030 Buffers Free : 2780
Lowest : 1841
Missed : 0
PC-2810-48G-01#exit
PC-2810-48G-01> exit
Do you want to log out [y/n]? y
Connection to 10.1.6.254 closed by remote host.
Connection to 10.1.6.254 closed.
From: rancid-discuss-***@shrubbery.net [mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Gerhard Mourani
Sent: October-18-11 3:55 PM
To: Marito ...; rancid-***@shrubbery.net
Subject: Re: [rancid] HP Procurve 2810
I get the following error:
PC-2810-48G-01# couldn't compile regular expression pattern: parentheses () not balanced
while executing
"expect {
-re $reprompt {}
-re "\[\n\r]+" { exp_continue }
}"
(procedure "run_commands" line 21)
invoked from within
"run_commands $prompt $command"
("foreach" body line 166)
invoked from within
"foreach router [lrange $argv $i end] {
set router [string tolower $router]
# attempt at platform switching.
set platform ""
send_user ..."
(file "/usr/bin/clogin" line 743) PC-2810-48G-01# couldn't compile regular expression pattern: parentheses () not balanced
while executing
"expect {
-re $reprompt {}
-re "\[\n\r]+" { exp_continue }
}"
(procedure "run_commands" line 21)
invoked from within
"run_commands $prompt $command"
("foreach" body line 166)
invoked from within
"foreach router [lrange $argv $i end] {
set router [string tolower $router]
# attempt at platform switching.
set platform ""
send_user ..."
(file "/usr/bin/clogin" line 743)
From: rancid-discuss-***@shrubbery.net<mailto:rancid-discuss-***@shrubbery.net> [mailto:rancid-discuss-***@shrubbery.net]<mailto:[mailto:rancid-discuss-***@shrubbery.net]> On Behalf Of Marito ...
Sent: October-18-11 3:50 PM
To: rancid-***@shrubbery.net<mailto:rancid-***@shrubbery.net>
Subject: Re: [rancid] HP Procurve 2810
Gerhard,
Also check if the Procurve can run "show system". Try doing clogin -c 'show system' IPADDRS.
Regards
________________________________
Date: Tue, 18 Oct 2011 13:43:00 -0600
From: ***@gmail.com<mailto:***@gmail.com>
To: ***@prival.ca<mailto:***@prival.ca>
CC: rancid-***@shrubbery.net<mailto:rancid-***@shrubbery.net>
Subject: Re: [rancid] HP Procurve 2810
What does router.db look like?
2011/10/18 Gerhard Mourani <***@prival.ca<mailto:***@prival.ca>>
Hello List,
I've problem making Rancid (version 2.3.6) work with HP Procurve 2810 switches. I'm able to connect to the switch correctly but the generated report is empty! If I check inside the log files, I can see the following:
10.1.6.254<http://10.1.6.254/>: found unexpected command - "show system"
10.1.6.254<http://10.1.6.254/>: missed cmd(s): show stack,write term
10.1.6.254<http://10.1.6.254/>: End of run not found
I use the following parameters in my .cloginrc file:
add autoenable 10.1.6.254 1
add user 10.1.6.254 myadmin
add password 10.1.6.254 mypassword myenpassword
Regards,
_______________________________________________
Rancid-discuss mailing list
Rancid-***@shrubbery.net<mailto:Rancid-***@shrubbery.net>
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
--
Brian Talley
***@gmail.com<mailto:***@gmail.com>
_______________________________________________ Rancid-discuss mailing list Rancid-***@shrubbery.net<mailto:Rancid-***@shrubbery.net> http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss