[rancid] Rancid only seems to want to use clogin and not jlogin

[Stephen Warner-Jones]

Hi All,

I've setting up RANCID for our network with 2500+ devices and I'm
having a few issues, I've been trawling the archives of the list but I
can't find a few answers.

I'm using rancid 2.3.2a7 on debian.

I'm trying to get config from a few Juniper M7i's and I'm meeting an
odd problem. I've set the equipment type as juniper in /home/.cloginrc
and if I login with jlogin from command line it works fine.

However when I use rancid as the same user I get an timeout error
back from clogin:


rancid hostname
hostname clogin error: Error: TIMEOUT reached

Is there a trick I'm missing to get rancid to use jlogin not clogin,
I'm assuming the paths are set right as i can use jlogin from the cmd line.

Any help greatly appreciated


Steve

[Lance Vermilion]

Steve,
rancid links to clogin. When you run rancid-run it will then look at
rancid-fe and figure out that it needs to use jrancid (I think that is what
it is called).

On Wed, Oct 22, 2008 at 9:03 AM, Stephen Warner-Jones <

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi All,
I've setting up RANCID for our network with 2500+ devices and I'm
having a few issues, I've been trawling the archives of the list but I
can't find a few answers.
I'm using rancid 2.3.2a7 on debian.
I'm trying to get config from a few Juniper M7i's and I'm meeting an
odd problem. I've set the equipment type as juniper in /home/.cloginrc
and if I login with jlogin from command line it works fine.
However when I use rancid as the same user I get an timeout error
rancid hostname
hostname clogin error: Error: TIMEOUT reached
Is there a trick I'm missing to get rancid to use jlogin not clogin,
I'm assuming the paths are set right as i can use jlogin from the cmd line.
Any help greatly appreciated
Steve
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFI/07YszlDOxp8fpERAu35AJ9x1T3Fk2dpYEmDIcufxfcq4T5pqgCeOIky
gZzVBZLk+Q3d7GD6T47r8iw=
=U2be
-----END PGP SIGNATURE-----
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss

[hina]

Hi
Look on your ~rancid/bin/rancid-fe
Inside you can find with login is used with juniper.
and modify as necessary
hina

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi All,
I've setting up RANCID for our network with 2500+ devices and I'm
having a few issues, I've been trawling the archives of the list but I
can't find a few answers.
I'm using rancid 2.3.2a7 on debian.
I'm trying to get config from a few Juniper M7i's and I'm meeting an
odd problem. I've set the equipment type as juniper in /home/.cloginrc
and if I login with jlogin from command line it works fine.
However when I use rancid as the same user I get an timeout error
rancid hostname
hostname clogin error: Error: TIMEOUT reached
Is there a trick I'm missing to get rancid to use jlogin not clogin,
I'm assuming the paths are set right as i can use jlogin from the cmd line.
Any help greatly appreciated
Steve
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFI/07YszlDOxp8fpERAu35AJ9x1T3Fk2dpYEmDIcufxfcq4T5pqgCeOIky
gZzVBZLk+Q3d7GD6T47r8iw=
=U2be
-----END PGP SIGNATURE-----
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss