P C
2009-11-17 02:53:53 UTC
I have a Cisco IOS router which keeps alerting the same exact change
notification e-mail with the following changes over and over. Why is Rancid
doing this?:
- rxspeed 3600000
- txspeed 384000
+ speed 384000
The actual configuration under this section currently on the device is as
follows:
line 0/1/0
exec-timeout 0 0
script dialer GSM
modem InOut
no exec
rxspeed 3600000
txspeed 384000
I never receive an alert saying the configuration is changing both
directions, so if it is indeed flapping betwen the two RANCID is not
reporting it.
Thanks,
Paul
notification e-mail with the following changes over and over. Why is Rancid
doing this?:
- rxspeed 3600000
- txspeed 384000
+ speed 384000
The actual configuration under this section currently on the device is as
follows:
line 0/1/0
exec-timeout 0 0
script dialer GSM
modem InOut
no exec
rxspeed 3600000
txspeed 384000
I never receive an alert saying the configuration is changing both
directions, so if it is indeed flapping betwen the two RANCID is not
reporting it.
Thanks,
Paul