[rancid] Rancid 3.0 config problem

[Vyankat Gaddamwar]

Hi,

I installed rancid 3.0 and configured properly as per documentation but when I run bin/rancid-run no output and logs are empty.
Any good way to troubleshoot this?


/venky

[Alan McKinnon]

Post by Vyankat Gaddamwar
Hi,
I installed rancid 3.0 and configured properly as per documentation but
when I run bin/rancid-run no output and logs are empty.
Any good way to troubleshoot this?

Did you replace the ":" separators in all router.db files with ";"?

[Vyankat Gaddamwar]

Hi Alan,

Thanks for the help. After applying solution suggested by you resolved my issue.

/V.Reddy


-----Original Message-----
From: rancid-discuss-***@shrubbery.net [mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Alan McKinnon
Sent: Tuesday, April 15, 2014 4:24 PM
To: rancid-***@shrubbery.net
Subject: Re: [rancid] Rancid 3.0 config problem

Post by Vyankat Gaddamwar
Hi,
I installed rancid 3.0 and configured properly as per documentation
but when I run bin/rancid-run no output and logs are empty.
Any good way to troubleshoot this?

Did you replace the ":" separators in all router.db files with ";"?




--
Alan McKinnon
***@gmail.com

[Alan McKinnon]

It's in the shipped help files, but still catches people out.

That change is necessary to be able to deal with IPv6 addresses in field 1

Post by Vyankat Gaddamwar
Hi Alan,
Thanks for the help. After applying solution suggested by you resolved my issue.
/V.Reddy
-----Original Message-----
Sent: Tuesday, April 15, 2014 4:24 PM
Subject: Re: [rancid] Rancid 3.0 config problem

Post by Vyankat Gaddamwar
Hi,
I installed rancid 3.0 and configured properly as per documentation
but when I run bin/rancid-run no output and logs are empty.
Any good way to troubleshoot this?

Did you replace the ":" separators in all router.db files with ";"?
--
Alan McKinnon
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

[Lee]

Post by Alan McKinnon
It's in the shipped help files, but still catches people out.

maybe because it hasn't been changed everywhere in README?

8) For each "group", modify the router.db file in the group directory.
The file is of the form "router:mfg:state" where "router" is

further on down it has been changed, but I almost stopped reading there.

Regards,
Lee

Post by Alan McKinnon
That change is necessary to be able to deal with IPv6 addresses in field 1

Post by Vyankat Gaddamwar
Hi Alan,
Thanks for the help. After applying solution suggested by you resolved my issue.
/V.Reddy
-----Original Message-----
Sent: Tuesday, April 15, 2014 4:24 PM
Subject: Re: [rancid] Rancid 3.0 config problem

Post by Vyankat Gaddamwar
Hi,
I installed rancid 3.0 and configured properly as per documentation
but when I run bin/rancid-run no output and logs are empty.
Any good way to troubleshoot this?

Did you replace the ":" separators in all router.db files with ";"?
--
Alan McKinnon
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss

--
Alan McKinnon
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss