William Pleasants
2011-04-13 13:49:54 UTC
Hi all.
I'm trying to use cloginrc to login Cisco routers hanging off a Cisco
console server. The address for each router remains the same. I'm just
changing the telnet port for every router and attempting to add an extra
carriage return, however the session times out. I am able to see a typical
Cisco login prompt when telneting to the port when doing it manually. I've
done some searching and couldn't turn up anything. My Tcl skills are week,
therefore I'm hoping someone might be able to provide some suggestions.
Below is my cloginrc configuration. Any assistance is appreciated.
Thanks,
Chip
add user r1 routers
add userprompt r1 {"\n"}
add password r1 password1234 password1234
add method r1 telnet:2001
I'm trying to use cloginrc to login Cisco routers hanging off a Cisco
console server. The address for each router remains the same. I'm just
changing the telnet port for every router and attempting to add an extra
carriage return, however the session times out. I am able to see a typical
Cisco login prompt when telneting to the port when doing it manually. I've
done some searching and couldn't turn up anything. My Tcl skills are week,
therefore I'm hoping someone might be able to provide some suggestions.
Below is my cloginrc configuration. Any assistance is appreciated.
Thanks,
Chip
add user r1 routers
add userprompt r1 {"\n"}
add password r1 password1234 password1234
add method r1 telnet:2001