S***@bell.ca
2007-02-16 19:08:45 UTC
I'm sorry to be bringing this up again but I've search in the past post but never found any step-by-step (idiot proof) instructions for my problem.
I have a Cisco WS-C6509 and would need RANCID to be able to get its configuration.
As I'm not CISCO switch savy nor a Rancid expert I'm left turning in circles and loosing my hair.
I must have multiple problems like:
1- command prompt which is c3c01s> (enable)
How do I change it so that I have # instead of >?
2-Do I need to upgrade my version of Rancid and/or expect?
If yes how can I determine which version I'm currently running?
Here is a snapshot of a manual telnet session to the switch:
[***@dcoc4v etc]$ telnet c3c01s
Destination c3c01s found for customer 3CS.
Connecting to c3c01s using source IP of the client 3CS (198.235.125.28)
Trying 192.168.248.65...
Connected to 192.168.248.65.
Escape character is '^]'.
Cisco Systems Console
c
******************************************************************************
* SYSTEME INFORMATIQUE PRIVE. RESERVE AUX PERSONNES AUTORISEES. TOUT ACCES *
* NON AUTORISE AU DELA DE CE POINT ENTRAINERA DES POURSUITES JUDICIAIRES. *
*---------------------------------------------------------------------------*
* PRIVATE COMPUTER SYSTEM, RESERVED FOR AUTHORIZED USERS. *
* ANY NON-AUTHORIZED ACCESS BEYOND THIS POINT MAY INVOLVE PROSECUTION. *
*----------------------------------------------------------------------------*
* Gere par/Managed by BELL CANADA et/by Connexim *
******************************************************************************
Enter password:
c3c01s> en
Enter password:
c3c01s> (enable) sh ver
WS-C6509 Software, Version NmpSW: 8.3(6)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Feb 8 2005, 13:10:10
System Bootstrap Version: 5.3(1)
System Boot Image File is 'bootflash:cat6000-supk8.8-3-6.bin'
System Configuration register is 0x2122
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA044000YW
PS1 Module: WS-CAC-1300W Serial #: SON04331283
PS2 Module: WS-CAC-1300W Serial #: SON04330467
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP1A-2GE SAD05020STG Hw : 7.3
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 8.3(6)
Sw1: 8.3(6)
WS-F6K-PFC SAD050303KG Hw : 1.1
Sw :
WS-X6K-SUP1A-2GE SAD05020STG Hw : 7.3
Sw :
2 2 WS-X6K-SUP1A-2GE SAD05020R9G Hw : 7.0
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 8.3(6)
Sw1: 8.3(6)
WS-F6K-PFC SAD05020EE6 Hw : 1.1
Sw :
WS-X6K-SUP1A-2GE SAD05020R9G Hw : 7.0
Sw :
3 48 WS-X6348-RJ-45 SAD04340E68 Hw : 1.1
Fw : 5.4(2)
Sw : 8.3(6)
4 48 WS-X6348-RJ-45 SAL050958KT Hw : 2.2
Fw : 5.4(2)
Sw : 8.3(6)
5 8 WS-X6408A-GBIC SAL05031CNP Hw : 1.3
Fw : 5.4(2)
Sw : 8.3(6)
6 8 WS-X6408A-GBIC SAL05031FWA Hw : 1.3
Fw : 5.4(2)
Sw : 8.3(6)
8 48 WS-X6148-GE-TX SAD07510BEK Hw : 6.1
Fw : 7.2(1)
Sw : 8.3(6)
9 8 WS-X6608-T1 SAD075001YG Hw : 1.4
Fw : 5.4(2)
Sw : 8.3(6)
HP1: D004040009E2; DSP1: D0054320 (4.3.201)
HP2: D004040009E2; DSP2: D0054320 (4.3.201)
HP3: D004040009E2; DSP3: D0054320 (4.3.201)
HP4: D004I3A0; DSP4: D005H300 (3.6.12)
HP5: C00104000001; DSP5: C002E031 (3.3.2)
HP6: C00104000001; DSP6: C002E031 (3.3.2)
HP7: C00104000001; DSP7: C002E031 (3.3.2)
HP8: C00104000001; DSP8: C002E031 (3.3.2)
15 1 WS-F6K-MSFC2 SAD050301BS Hw : 1.7
Fw : 12.1(20)E2
Sw : 12.1(20)E2
16 1 WS-F6K-MSFC2 SAD05020GLD Hw : 1.1
Fw : 12.1(20)E2
Sw : 12.1(20)E2
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 130944K 62471K 68473K 16384K 12611K 3773K 512K 374K 138K
Uptime is 213 days, 10 hours, 18 minutes
c3c01s> (enable)
Stéphane Malo
Bell Solutions d'impartition en T.I.C.
Spécialiste gestion des systèmes
Bureau : (514) 499-7273
Cellulaire: (514) 514-963-6256
<mailto:***@bell.ca> ***@bell.ca
I have a Cisco WS-C6509 and would need RANCID to be able to get its configuration.
As I'm not CISCO switch savy nor a Rancid expert I'm left turning in circles and loosing my hair.
I must have multiple problems like:
1- command prompt which is c3c01s> (enable)
How do I change it so that I have # instead of >?
2-Do I need to upgrade my version of Rancid and/or expect?
If yes how can I determine which version I'm currently running?
Here is a snapshot of a manual telnet session to the switch:
[***@dcoc4v etc]$ telnet c3c01s
Destination c3c01s found for customer 3CS.
Connecting to c3c01s using source IP of the client 3CS (198.235.125.28)
Trying 192.168.248.65...
Connected to 192.168.248.65.
Escape character is '^]'.
Cisco Systems Console
c
******************************************************************************
* SYSTEME INFORMATIQUE PRIVE. RESERVE AUX PERSONNES AUTORISEES. TOUT ACCES *
* NON AUTORISE AU DELA DE CE POINT ENTRAINERA DES POURSUITES JUDICIAIRES. *
*---------------------------------------------------------------------------*
* PRIVATE COMPUTER SYSTEM, RESERVED FOR AUTHORIZED USERS. *
* ANY NON-AUTHORIZED ACCESS BEYOND THIS POINT MAY INVOLVE PROSECUTION. *
*----------------------------------------------------------------------------*
* Gere par/Managed by BELL CANADA et/by Connexim *
******************************************************************************
Enter password:
c3c01s> en
Enter password:
c3c01s> (enable) sh ver
WS-C6509 Software, Version NmpSW: 8.3(6)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Feb 8 2005, 13:10:10
System Bootstrap Version: 5.3(1)
System Boot Image File is 'bootflash:cat6000-supk8.8-3-6.bin'
System Configuration register is 0x2122
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA044000YW
PS1 Module: WS-CAC-1300W Serial #: SON04331283
PS2 Module: WS-CAC-1300W Serial #: SON04330467
Mod Port Model Serial # Versions
--- ---- ------------------- ----------- --------------------------------------
1 2 WS-X6K-SUP1A-2GE SAD05020STG Hw : 7.3
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 8.3(6)
Sw1: 8.3(6)
WS-F6K-PFC SAD050303KG Hw : 1.1
Sw :
WS-X6K-SUP1A-2GE SAD05020STG Hw : 7.3
Sw :
2 2 WS-X6K-SUP1A-2GE SAD05020R9G Hw : 7.0
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 8.3(6)
Sw1: 8.3(6)
WS-F6K-PFC SAD05020EE6 Hw : 1.1
Sw :
WS-X6K-SUP1A-2GE SAD05020R9G Hw : 7.0
Sw :
3 48 WS-X6348-RJ-45 SAD04340E68 Hw : 1.1
Fw : 5.4(2)
Sw : 8.3(6)
4 48 WS-X6348-RJ-45 SAL050958KT Hw : 2.2
Fw : 5.4(2)
Sw : 8.3(6)
5 8 WS-X6408A-GBIC SAL05031CNP Hw : 1.3
Fw : 5.4(2)
Sw : 8.3(6)
6 8 WS-X6408A-GBIC SAL05031FWA Hw : 1.3
Fw : 5.4(2)
Sw : 8.3(6)
8 48 WS-X6148-GE-TX SAD07510BEK Hw : 6.1
Fw : 7.2(1)
Sw : 8.3(6)
9 8 WS-X6608-T1 SAD075001YG Hw : 1.4
Fw : 5.4(2)
Sw : 8.3(6)
HP1: D004040009E2; DSP1: D0054320 (4.3.201)
HP2: D004040009E2; DSP2: D0054320 (4.3.201)
HP3: D004040009E2; DSP3: D0054320 (4.3.201)
HP4: D004I3A0; DSP4: D005H300 (3.6.12)
HP5: C00104000001; DSP5: C002E031 (3.3.2)
HP6: C00104000001; DSP6: C002E031 (3.3.2)
HP7: C00104000001; DSP7: C002E031 (3.3.2)
HP8: C00104000001; DSP8: C002E031 (3.3.2)
15 1 WS-F6K-MSFC2 SAD050301BS Hw : 1.7
Fw : 12.1(20)E2
Sw : 12.1(20)E2
16 1 WS-F6K-MSFC2 SAD05020GLD Hw : 1.1
Fw : 12.1(20)E2
Sw : 12.1(20)E2
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 130944K 62471K 68473K 16384K 12611K 3773K 512K 374K 138K
Uptime is 213 days, 10 hours, 18 minutes
c3c01s> (enable)
Stéphane Malo
Bell Solutions d'impartition en T.I.C.
Spécialiste gestion des systèmes
Bureau : (514) 499-7273
Cellulaire: (514) 514-963-6256
<mailto:***@bell.ca> ***@bell.ca