[rancid] Cisco IOS-XR Help - End of run not found

[Asad]

Hi All,

We are trying to add a few ASR9000 IOS-XR devices to Rancid 3.4.1. My issue
seems similar
to http://www.shrubbery.net/pipermail/rancid-discuss/2014-May/007597.html, I
have un-commented NOPIPE=YES; export NOPIPE in rancid.conf and I have also
tried to uncomment some of the show commands but it is still not working.
To isolate any IOS-XR configuration issues I deployed a XRv with very basic
configuration and I get same "end of run not found" error message.

Any help would be appreciated.

***@jp-script/opt/rancid#rancid -d -t cisco-xr lab-xrv-01
loadtype: device type cisco-xr
loadtype: found device type cisco-xr in /opt/rancid/etc/rancid.types.base
executing clogin -t 90 -c"terminal exec prompt no-timestamp;admin show
version;admin show install summary;admin show license udi;admin show
license;admin show variables boot;admin show hw-module fpd location
all;show redundancy;show install active;admin show diag;admin show
inventory raw;show debug;show rpl maximum;admin show running;show
running-config" lab-xrv-01
PROMPT MATCH: RP/0/0/CPU0:lab-xrv-01#
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#terminal exec prompt no-timestamp
In RunCommand: RP/0/0/CPU0:lab-xrv-01#terminal exec prompt no-timestamp
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show version
In ShowVersion: RP/0/0/CPU0:lab-xrv-01#admin show version
TYPE = XRv Series
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show install summary
In ShowInstallSummary: RP/0/0/CPU0:lab-xrv-01#admin show install summary
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show license udi
In ShowLicense: RP/0/0/CPU0:lab-xrv-01#admin show license udi
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show license
In ShowLicense: RP/0/0/CPU0:lab-xrv-01#admin show license
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show variables boot
In ShowBootVar: RP/0/0/CPU0:lab-xrv-01#admin show variables boot
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show hw-module fpd location all
In ShowRunning: RP/0/0/CPU0:lab-xrv-01#admin show hw-module fpd
location all
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show redundancy
In ShowRedundancy: RP/0/0/CPU0:lab-xrv-01#show redundancy
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show install active
In ShowInstallActive: RP/0/0/CPU0:lab-xrv-01#show install active
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show diag
In ShowDiag: RP/0/0/CPU0:lab-xrv-01#admin show diag
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show inventory raw
In ShowInventory: RP/0/0/CPU0:lab-xrv-01#admin show inventory raw
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show debug
In ShowDebug: RP/0/0/CPU0:lab-xrv-01#show debug
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show rpl maximum
In ShowRPL: RP/0/0/CPU0:lab-xrv-01#show rpl maximum
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#admin show running
In ShowRunning: RP/0/0/CPU0:lab-xrv-01#admin show running
HIT COMMAND:RP/0/0/CPU0:lab-xrv-01#show running-config
In WriteTerm: RP/0/0/CPU0:lab-xrv-01#show running-config
lab-xrv-01: End of run not found
lab-xrv-01: End of run not found
end

Thanks
Asad

[Alan McKinnon]

This post might be inappropriate. Click to display it.