[rancid] Problem getting config from a Pix 515e

[Chris Gauthier]

I have a pix 515e w/FOS 7.2 and I get the following errors when I run rancid (2.3.2a7 on Ubuntu 8.04 Server LTS). Any thoughts out there? I finally got the clogin part working, so it is authenticating just fine. Is clogin the correct type for a Pix? What about a Pix running FOS 6.3?

Thanks,

Chris

***@myserver:~/logs$ tail firewalls.20080828.225403
firewall.example.com: missed cmd(s): admin show diag,dir /all slavedisk2:,show rsp chassis-info,dir /all sec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,show install active,show bootvar,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show variables boot,show boot,show inventory raw,dir /all slavedisk1:,show env all,show module,admin show env all,show controllers,admin show version,show diagbus,dir /all slavedisk0:,show debug,show idprom backplane,dir /all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,dir /all nvram:,show version,show vlan-switch,admin show variables boot,show redundancy secondary,show running-config,show c7200,dir /all slot1:
firewall.example.com: End of run not found
!

[Chris Gauthier]

So, my problem was more basic than anything I want to admit to...



My .cloginrc was referencing my-firewall-inside and the router.db was
referencing my-firewall-515e.



DOH! Now that is fixed and all works great AND I learned how to patch
Ubuntu's expect.



Chris Gauthier, CCNA

Network Administrator

Marion and Polks Schools Credit Union



From: rancid-discuss-***@shrubbery.net
[mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Chris
Gauthier
Sent: Thursday, August 28, 2008 11:08 PM
To: rancid-***@shrubbery.net
Subject: [SPAM] - [rancid] Problem getting config from a Pix 515e -
Bayesian Filter detected spam



I have a pix 515e w/FOS 7.2 and I get the following errors when I run
rancid (2.3.2a7 on Ubuntu 8.04 Server LTS). Any thoughts out there? I
finally got the clogin part working, so it is authenticating just fine.
Is clogin the correct type for a Pix? What about a Pix running FOS 6.3?



Thanks,



Chris



***@myserver:~/logs$ tail firewalls.20080828.225403
firewall.example.com: missed cmd(s): admin show diag,dir /all
slavedisk2:,show rsp chassis-info,dir /all sec-slot2:,show diag,dir /all
disk1:,show gsr chassis,dir /all sec-nvram:,show diag chassis-info,dir
/all disk2:,dir /all sec-bootflash:,show spe version,dir /all
slaveslot2:,dir /all disk0:,show install active,show bootvar,dir /all
slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all
slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show
variables boot,show boot,show inventory raw,dir /all slavedisk1:,show
env all,show module,admin show env all,show controllers,admin show
version,show diagbus,dir /all slavedisk0:,show debug,show idprom
backplane,dir /all bootflash:,dir /all sec-slot0:,dir /all
sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all
slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show
vlan,dir /all slavebootflash:,show controllers cbus,dir /all
slaveslot1:,dir /all nvram:,show version,show vlan-switch,admin show
variables boot,show redundancy secondary,show running-config,show
c7200,dir /all slot1:
firewall.example.com: End of run not found
!