narkive

unknown

1970-01-01 00:00:00 UTC

Here is the output from a manual telnet to the device:

--------------------------------------------------------------------------------
telnet 172.30.26.16
Trying 172.30.26.16...
Connected to 172.30.26.16 (172.30.26.16).
Escape character is '^]'.

***********************************************************************
* Access to this computer system is limited to authorised users only. *
* Unauthorised users may be subject to prosecution under the Crimes *
* Act or State legislation *
* *
* Please note, ALL CUSTOMER DETAILS are confidential and must *
* not be disclosed. *
***********************************************************************

User Access Verification (ISP V1)

Username: myusername
Password:
Signon successful.

spgvsour01c28#
--------------------------------------------------------------------------------

Again, username has been modified for privacy.

If anyone can shed some light on what the issue may be, or point me in a
direction that may enable me to trouble shoot a bit more, that would be much
appreciated.

Regards

-Hurgh-

------=_Part_27018_3660500.1228693746477
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable
Content-Disposition: inline

Hi all, I am trying to login to a Cisco router that has AutoEnable setup (enter user and pass, and you are enabled). I have the following in my .clogin file: --------------------------------------------------------------------------------- 
add user <a href="http://172.30.26.16">172.30.26.16</a>                   myusername add password <a href="http://172.30.26.16">172.30.26.16</a>               {mypassword} add autoenable <a href="http://172.30.26.16">172.30.26.16</a>     1 
--------------------------------------------------------------------------------- The User and Pass have been swapped out, but I have confirmed the ones I am using are correct (can manually telnet to the device using the user and pass to login correctly). 
 I have confirmed that the router supplies the correct "Username" and "Password" prompts. The following is the error I get when I run: rancid <a href="http://172.30.26.16">172.30.26.16</a> 
 -------------------------------------------------------------------------------- ./rancid <a href="http://172.30.26.16">172.30.26.16</a> write(spawn_id=1): broken pipe     while executing "send_user -- "$expect_out(buffer)"" 
    invoked from within "expect -nobrace -re+ { exp_continue } -re {^[^  *]*spgvsour01c([^#>\r\n]+)?[#>]($[^)\r\n]+$)?} { send_user -- "$expect_out(buffer)"                                                 } -re {..." 
    invoked from within "expect {                 -re "\b+"                       { exp_continue }                 -re "^\[^\n\r *]*$reprompt"     { send_user -- "$expect_out(buffer)" 
                                                }                 -re "^\[^\n\r]*$reprompt."      { send..."     invoked from within "if [ string match "*\;*" "$command" ] { 
        set commands [split $command \;]         set num_commands [llength $commands]         # the pager can not be turned off on ..."     (procedure "run_commands" line 34)     invoked from within 
"run_commands $prompt $command"     ("foreach" body line 150)     invoked from within "foreach router [lrange $argv $i end] {     set router [string tolower $router]     # attempt at platform switching. 
    set platform ""     send_user ..."     (file "/home/rancid/bin/clogin" line 712) <a href="http://172.30.26.16">172.30.26.16</a>: missed cmd(s): admin show diag,dir /all slavedisk2:,dir /all sec-slot2:,show diag,dir /all disk1:,dir /all sec-nvram:,dir /all disk2:,dir /all sec-bootflash:,show spe version,dir /all slaveslot2:,dir /all disk0:,dir /all slaveslot0:,dir /all sec-slot1:,dir /all harddiska:,dir /all slavenvram:,dir /all sec-disk2:,dir /all slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb:,show inventory raw,dir /all slavedisk1:,show module,show controllers,show diagbus,dir /all slavedisk0:,show debug,dir /all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp status,dir /all sup-bootflash:,dir /all slot2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir /all slavebootflash:,show controllers cbus,dir /all slaveslot1:,show vlan-switch,show running-config,show c7200,dir /all slot1: 
<a href="http://172.30.26.16">172.30.26.16</a>: End of run not found ! -------------------------------------------------------------------------------- I have done some searching etc, but can not find what the problem may be.