Discussion:
unknown
1970-01-01 00:00:00 UTC
Permalink
-Lance
John,
Thanks for your time... here is the issue ...
If I enable telnet on the router
Line vty 0 4
transport input telnet ssh ( I added telnet here )
The result is that it partially works, but its dead slow=85.
bom01-wxbb-art01
spawn telnet bom01-wxbb-art01
Trying 210.4.192.33...
Connected to bom01-wxbb-art01.webex.com (210.4.192.33).
Escape character is '^]'.
Username: rancid
bom01-wxbb-art01#
bom01-wxbb-art01#term length 0 ( I pressed ctrl+c here =85 )
If I disable telnet=85
Lien vty 0 4
Transport input ssh ( I removed the telnet here )
Then the result is as below=85
bom01-wxbb-art01
spawn telnet bom01-wxbb-art01
Trying 210.4.192.33...
telnet: connect to address 210.4.192.33: Connection refused
spawn ssh -c 3des -x -l rancid bom01-wxbb-art01
Error: TIMEOUT reached
Please suggest whether do I need regenerate the crypto keys for ssh acces=
s?
I am able to ssh to bom01-wxbb-art01 router from putty with out any issu=
es.
This router's brother bom01-wxbb-art02 is working fine with out any issue=
s.
Regards
Suresh
-----Original Message-----
Sent: Wednesday, February 27, 2008 3:24 PM
Subject: Re: [rancid] ASSISTANCE NEEDED
Hi!
"TIMEOUT reached" just means that the device was not reachable, offline=
,
powered down, could have been anything.
Georg
not quite, it appears that it got through at least the first command. So=
,
the login was successful and its began ok. Please see section 3 of the F=
AQ.
27.02.2008 09:04
An
Kopie
Thema
[rancid] ASSISTANCE NEEDED
Guys,
I am new to the RANCID. Rancid was setup by my colleague & I am the end
user. Some of the routers works fine, but on some of the routers I get =
the
below error.
Could some one please assist me?? I googled for an answer, but I could =
not
get the correct answer?
routers.20080226.223517:bom01-wxbb-art01.webex.com: End
of run not found
routers.20080226.223517:bom01-wxbb-art01.webex.com clogin
TIMEOUT reached
missed cmd(s): dir
/all slavedisk2:,show rsp chassis-info,dir /all s
ec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all
sec-nvram:,dir /all disk2:,dir /all sec-bootflash:,show sp
e version,dir /all slaveslot2:,dir /all disk0:,show bootvar,dir /all
,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show variables boot,show boot,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir
/all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show
vtp status,dir /all sup-bootflash:,dir /all slot
2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show
vlan,dir /all slavebootflash:,show controllers cbus,d
ir /all slaveslot1:,dir /all nvram:,show running-config,show c7200,dir
routers.20080226.223517:bom01-wxbb-art01.webex.com: End
of run not found
Regards,
Suresh
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
----------------------------------------
Raiffeisen Informatik GmbH, Firmenbuchnr. 88239p, Handelsgericht Wien, =
DVR
0486809, UID ATU 16351908
Der Austausch von Nachrichten mit oben angefuehrtem Absender via E-Mail
dient ausschliesslich Informationszwecken. Rechtsgeschaeftliche Erklaerun=
gen
duerfen ueber dieses Medium nicht ausgetauscht werden.
Correspondence with above mentioned sender via e-mail is only for
information purposes. This medium may not be used for exchange of
legally-binding communications.
----------------------------------------
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
Loading...