Jethro R Binks
2011-06-23 08:17:06 UTC
add userprompt 1.1.1.1 {"Enter tacacs username:"} rancid
add password 1.1.1.1 rancidpassword enablepassword
add method * telnet ssh
1.1.1.1:hp:up
Why did you specify "hp" there, when it is apparently cisco-ish?add password 1.1.1.1 rancidpassword enablepassword
add method * telnet ssh
1.1.1.1:hp:up
./clogin 1.1.1.1
If clogin works, set router.db instead to read:1.1.1.1:cisco:up
and see what happens then.
Jethro.
. . . . . . . . . . . . . . . . . . . . . . . . .
Jethro R Binks, Network Manager,
Information Services Directorate, University Of Strathclyde, Glasgow, UK
The University of Strathclyde is a charitable body, registered in
Scotland, number SC015263.
Unfortunately still no backup config inside the group , as opposed to the backup config of cisco product.
-----Original Message-----
Sent: mercoled? 22 giugno 2011 23.45
To: Schibuola, Raimi
Subject: Re: Rancid : consulting about Blade switch
But, it may be similar enough to an existing module that it just works.
like I mentioned below; this is probably not made by IBM, its more
likely that it is made by someone else and just branded as an IBM
product.
see the router.db(5) rancid manpage for a list of device types.
anyone has rancid working with these switches.
I don't know about this particular IBM model, but Blade Network
Technologies make the switches that HP use in their blade enclosures, the
GbE2 and so on. These have a default "AOS" CLI, which is like the Alteon
stuff in alogin/arancid (I don't otherwise know the connection between
Blade and Alteon). (John> A suggested additional command was sent to the
list earlier this week for arancid which is probably worth including).
On the other hand, the GbE2 can also be switched into a cisco-a-like CLI
mode, which is how I run mine, so I don't actually use alogin/arancid
here. I haven't got around to writing/modifying for a new module for the
Blade cisco-a-like CLI.
Hope that helps,
Jethro.
. . . . . . . . . . . . . . . . . . . . . . . . .
Jethro R Binks, Network Manager,
Information Services Directorate, University Of Strathclyde, Glasgow, UK
The University of Strathclyde is a charitable body, registered in
Scotland, number SC015263.
-----Original Message-----
Sent: mercoled? 22 giugno 2011 23.45
To: Schibuola, Raimi
Subject: Re: Rancid : consulting about Blade switch
Yes it is IBM vendor , The problem is we don't know who can make
rancid module customize for IBM .
Have you something consultant who can make it?
We'd need to have one to test.rancid module customize for IBM .
Have you something consultant who can make it?
But, it may be similar enough to an existing module that it just works.
like I mentioned below; this is probably not made by IBM, its more
likely that it is made by someone else and just branded as an IBM
product.
see the router.db(5) rancid manpage for a list of device types.
anyone has rancid working with these switches.
Technologies make the switches that HP use in their blade enclosures, the
GbE2 and so on. These have a default "AOS" CLI, which is like the Alteon
stuff in alogin/arancid (I don't otherwise know the connection between
Blade and Alteon). (John> A suggested additional command was sent to the
list earlier this week for arancid which is probably worth including).
On the other hand, the GbE2 can also be switched into a cisco-a-like CLI
mode, which is how I run mine, so I don't actually use alogin/arancid
here. I haven't got around to writing/modifying for a new module for the
Blade cisco-a-like CLI.
Hope that helps,
Jethro.
. . . . . . . . . . . . . . . . . . . . . . . . .
Jethro R Binks, Network Manager,
Information Services Directorate, University Of Strathclyde, Glasgow, UK
The University of Strathclyde is a charitable body, registered in
Scotland, number SC015263.
Regards
If you need you can call me directly.
Regards
Raimi Schibuola
Network and Security Management
London Stock Exchange Group
Direct Line: +39 0272426669 Internal : 82669
Mobile: +39 3408440699
-----Original Message-----
Sent: mercoled? 22 giugno 2011 18.34
To: Schibuola, Raimi
Subject: Re: Rancid : consulting about Blade switch
own switches. they are probably OEMs of someone else's product. if you
can find out who makes it, you might find that there is a rancid module
for it that works - or mostly works.
If you need you can call me directly.
Regards
Raimi Schibuola
Network and Security Management
London Stock Exchange Group
Direct Line: +39 0272426669 Internal : 82669
Mobile: +39 3408440699
-----Original Message-----
Sent: mercoled? 22 giugno 2011 18.34
To: Schibuola, Raimi
Subject: Re: Rancid : consulting about Blade switch
Morning,
Actually we used rancid for backup Juniper and Cisco firewall, switch ,
router.
We need support for add backup also for Blade Network Technologies
RackSwitch G8124 and G8000.
After completing config of router.db and .cloginrc , we have no backup
of switch.
Is it possible backup Blade switch?
not that I am aware of. this is from IBM? They probably dont make theirActually we used rancid for backup Juniper and Cisco firewall, switch ,
router.
We need support for add backup also for Blade Network Technologies
RackSwitch G8124 and G8000.
After completing config of router.db and .cloginrc , we have no backup
of switch.
Is it possible backup Blade switch?
own switches. they are probably OEMs of someone else's product. if you
can find out who makes it, you might find that there is a rancid module
for it that works - or mostly works.
We are using rancid on platform linux Ubuntu 10.10.
Waiting response.
Regards
Raimi Schibuola
Network and Security Management
London Stock Exchange Group
Direct Line: +39 0272426669 Internal : 82669
Mobile: +39 3408440699
Waiting response.
Regards
Raimi Schibuola
Network and Security Management
London Stock Exchange Group
Direct Line: +39 0272426669 Internal : 82669
Mobile: +39 3408440699