[rancid] Dell power connect 5448 - Debugging.

[Jeff MacDonald]

Right now I've tried both SMC and DELL for the router type in router.db and It tells me that telnet connection is refused. I suspect this is because the login prompts are not quite what those scripts expect. So I'm digging around a bit to see what is up.

Below is both the outputs when trying SMC vs Dell for types..

DELL :

Trying to get all of the configs.
switch1.toronto.terida.net <http://switch1.toronto.terida.net/>: missed cmd(s): all commands
switch1.toronto.terida.net <http://switch1.toronto.terida.net/> dllogin error: Error: Connection closed (telnet): switch1.toronto.terida.net <http://switch1.toronto.terida.net/>
switch1.toronto.terida.net <http://switch1.toronto.terida.net/>: End of run not found

SMC:

Trying to get all of the configs.
switch1.toronto.terida.net <http://switch1.toronto.terida.net/>: missed cmd(s): all commands
switch1.toronto.terida.net <http://switch1.toronto.terida.net/> hlogin error: Error: Connection Refused (telnet)
0: found end
switch1.toronto.terida.net <http://switch1.toronto.terida.net/>: End of run not found
!

I know that telnet works cause I can copy and paste my creds from .cloginrc and I get in just fine.

My router.db uses semicolons, so that is good. And I have it configured with a Juniper SSG device which works fine.

If you could point me at some debugging tips that would be great. Thanks

Jeff.



— Jeff MacDonald