David Ahrens
2016-02-09 15:45:17 UTC
Hi,
I have a number of old Brocade 200 SAN switches that I'm trying to add to rancid so I can have rancid backup the switch configs.
I added the following lines to rancid.types.base for Brocade:
#
# Brocade 200a
#
brocade;script;brocaderancid
brocade;login;brocadelogin
Here's my router.db
rancid-test.eng.citrite.net;smc;up
cc3750g;cisco;up
brocade200;brocade;up
I've attached the brocadelogin and brocaderancid scripts for collecting the switch configs.
When I run rancid-run, the attached log files shows the switch configuration was collected from the switch, but no data was written to brocade200.raw.
The file brocade200 contains:
!RANCID-CONTENT-TYPE: Brocade
!
!
I have rancid working with my Cisco and Dell PowerConnect switches, so I know rancid is installed and configured properly.
Thanks for your help,
David
I have a number of old Brocade 200 SAN switches that I'm trying to add to rancid so I can have rancid backup the switch configs.
I added the following lines to rancid.types.base for Brocade:
#
# Brocade 200a
#
brocade;script;brocaderancid
brocade;login;brocadelogin
Here's my router.db
rancid-test.eng.citrite.net;smc;up
cc3750g;cisco;up
brocade200;brocade;up
I've attached the brocadelogin and brocaderancid scripts for collecting the switch configs.
When I run rancid-run, the attached log files shows the switch configuration was collected from the switch, but no data was written to brocade200.raw.
The file brocade200 contains:
!RANCID-CONTENT-TYPE: Brocade
!
!
I have rancid working with my Cisco and Dell PowerConnect switches, so I know rancid is installed and configured properly.
Thanks for your help,
David