Sorry. im new to this scripting and hope you dont mind me asking more on
the bash thingy.
Yes, my rancid is working good with the common partitions..
Post by Shaun KrokThanks John --- this worked
Much appreciated
Shaun
*Sent:* Wednesday, February 04, 2015 12:57 PM
*To:* Shaun Krok
*Subject:* Re: [rancid] rancid not working with partitions v11.x tmsh F5
LTM
Hi,
I had a similar problem with the width of the terminal, so when the device
was out of sync, the prompt was becoming longer and some of the commands
failed to be parsed.
$ENV{'TERM'} = "vt100";
$ENV{'TERM'} = "vt100-w";
Regards,
John
Hi there
I was hoping someone had come across this issue.
We are using Rancid to collect diffs from our BIG-IP clusters (as per bash script below)
It works really well but are now facing an issue for reason unknown that
when the cluster is not synced the rancid fails and reports fetcher issues.
If I run the bash script below manually on each device it works without issue.
As soon the cluster is synced it works fine ..
It appears that TMSH is not allowing the script to work but it works fine
if I run it manually on the BIG-IP
What could be the problem ?
Thank you
Shaun
-----Original Message-----
Sent: Monday, October 13, 2014 8:13 AM
To: Mick O'Rourke
Subject: Re: [rancid] rancid not working with partitions v11.x tmsh F5 LTM
Thank your for the reply ---
i have created a bash script on the F5 and it works creating a
test.file with all the config
the file is in /root/f5part
#!/bin/bash
tmsh -q -c 'cd / ;list recursive'
how do i call from f5rancid or do i have this all wrong ?
{'tmsh -q list' => 'WriteTermTMSH'},
#{'tmsh -q -c /"cd /;list recursive"/' => 'WriteTermTMSH'},
We found easiestquickest way to modify rancid-f5 - post 11.x version
checkdetect, call a bash script under /root/bin which runs "tmsh -q
-c
cd / ;list recursive" working around the rancid limitationerrors that
resulted when cd / ;list recursive was added to rancid-f5 itself.
Post by Shaun KrokHi
I am busy to integrate Rancid into our network and have an issue
with partitions on BIG IP LTM v11.x
All works fine but Rancid does not backup all partitions âŠ
I am using the script from GIT with TMSH commands
This command work from bash : tmsh -q -c "cd /; list recursive" but
does not from the script ..
This is a snip from the forum where the issue was identified but is
Thanks
Shaun
here is a working tmsh version in the rancid git repo.
The only thing that doesnt work when adjusting the script to list
all
partition co config is a tmsh -q -c "cd /; list recursive" - it errors out
due to extra double quotes required by the -c option.
On Dec 6, 2012 8:57 PM, "Darius Seroka" <dariusjs at gmail.com [1]>
Shaun Krok
Network Team
--
Shaun Krok
Tel: 050 2424 381
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss [3]
------
[1] http://gmail.com
[3] http://www.shrubbery.net/mailman/listinfo/rancid-discuss
--
Shaun Krok
Tel: 050 2424 381
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss
This email message and its attachments are for the sole use of the
intended recipient(s) and may not be shared with any other party. They may
contain confidential information of 888 Holdings plc or its direct and
indirect subsidiaries (together, the â888 Groupâ) and are to be regarded as
confidential information under any non-disclosure agreement. Any review,
use, disclosure or distribution by persons or entities other than the
intended recipient(s) is prohibited. Nothing in this message is capable of
or intended to create any legally binding obligation. The 888 Group will
only ever assume a legally binding obligation where recorded in a written
agreement duly executed by the authorized signatories of the relevant 888
Group company. The 888 Group accepts no liability for any personal views
expressed in this message. If you are not the intended recipient, please
contact the sender by return and destroy all copies of the original message
and its attachments. Thank you
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss
This email message and its attachments are for the sole use of the
intended recipient(s) and may not be shared with any other party. They may
contain confidential information of 888 Holdings plc or its direct and
indirect subsidiaries (together, the â888 Groupâ) and are to be regarded as
confidential information under any non-disclosure agreement. Any review,
use, disclosure or distribution by persons or entities other than the
intended recipient(s) is prohibited. Nothing in this message is capable of
or intended to create any legally binding obligation. The 888 Group will
only ever assume a legally binding obligation where recorded in a written
agreement duly executed by the authorized signatories of the relevant 888
Group company. The 888 Group accepts no liability for any personal views
expressed in this message. If you are not the intended recipient, please
contact the sender by return and destroy all copies of the original message
and its attachments. Thank you
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo/rancid-discuss