Hi,
I had the same problem, you need to make sure console paging is disabled.
The script version I have attached is v1.1.1.1 and this will disable paging
and then enable it again when the script has finished.
I have added a couple of lines to enter the global configuration mode for
use with vdoms and this seems to work OK, but I am still testing.
I have attached the script I am using, I have tested it on FortiOS 3.0 and
4.0. You must use an admin user account on the Fortigate to change the pager
settings.
Andy
-----Original Message-----
From: Iñaki Martínez Díez [mailto:***@acens.com]
Sent: 09 December 2010 11:47
To: Andy
Cc: rancid-***@shrubbery.net
Subject: Re: [rancid] Rancid + Fortinet
Hi,
I have some scrpt for fortigate with several patches applied and some
fixed but it really is not working correct.
The script connect correctly and get some config but not complete (i think
some paging <--more--> is ommiting some lines). Each time i run rancid-run
fortigate i got different config (without modification on the fortigate of
course).
I have tried this script with this version of fortigate:
Fortigate-1000AFA2 3.00,build0416,070821.
Someone has a good script that work with fortigates ?
I have attached my scripts (remember that do not work correctly for me)
Thank you.
Post by AndyYou are correct, the script I use is fnlogin which is from a patch
(provided by Diego Ercolani) which modifies the original nlogin;
The line is remarked;
# FortiOS 2.x prompts can end in either '#' or '$'
set prompt "\[#\\$]"
Andy
________________________________________
Iñaki Martínez Díez
Departamento de redes
acens Technologies S.L.
***@acens.com
Teléfono: 637 772 156
Fax: 911 418 501
Este mensaje puede contener información confidencial dirigida exclusivamente
a su destinatario.
No se permite su copia o distribución sin la autorización expresa y por
anticipado de acens.
Si recibió este mensaje por error, por favor, comuníquelo al emisor y
elimínelo de su ordenador. Gracias.
This message may contain confidential information exclusively addressed to
its intended recipient.
The copy or distribution of this message is not permitted without the prior
express consent by acens.
If you are not the intended recipient of this message please advise the
sender and delete it. Thank you.
Post by Andy-----Original Message-----
Sent: 07 December 2010 22:17
Subject: RE: [rancid] Rancid + Fortinet
Guys
I was under the belief that fnlogin was used for Fortigate, is this
correct, also I cant find that line you talk about Andy can you
provide any more detail
-----Original Message-----
Sent: Tuesday, 7 December 2010 11:19 PM
Subject: Re: [rancid] Rancid + Fortinet
Hi,
Is the prompt set to expect "#" in your nlogin script?
Line 458 in nlogin should be;
set prompt "\[#\\$] $"
That works for me.
Andy
-----Original Message-----
Sent: 07 December 2010 09:15
Subject: [rancid] Rancid + Fortinet
Allo all
I have an issue with rancid backing up fortigate devices.
Everything seems correct, but when checking if nlogin works, it auto
system status;get conf" 192.168.0.51
192.168.0.51
ONEFIRE # get system status
Error: TIMEOUT reached
is not a typo you can use command-not-found to lookup the package that
cnf get
Now I just don't understand!!
Mozzi
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss