[rancid] Rancid help

[Lingam, Anusha]

Hello,

I have the rancid version 3.2 installed on our RHEL7 server. We are doing a migration from an old RHEL machine.

Rancid is configured successfully and rancid-cvs, rancid-run executes successfully.
The problem is, we need to get the old configs from the CVS on old machine to the CVS on new machine.
I tried to tar/untar of old CVS. Then, rancid-run is not updating the configs everytime.

Thanks
Anusha

[heasley]

Post by Lingam, Anusha
I tried to tar/untar of old CVS. Then, rancid-run is not updating the configs everytime.

this ought to work if you 'cvs update' each group after untarring the
cvs repo.

[Lingam, Anusha]

I just did that.
The rancid-run doesn’t update the configs now.

Your suggestions would be a great help.

Thanks
Anusha

Post by Lingam, Anusha
I tried to tar/untar of old CVS. Then, rancid-run is not updating the configs everytime.

this ought to work if you 'cvs update' each group after untarring the
cvs repo.

[Vacheslav]

Well paste the result

-----Original Message-----
From: Rancid-discuss [mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Lingam, Anusha
Sent: Thursday, December 7, 2017 12:28 AM
To: heasley <***@shrubbery.net>
Cc: rancid-***@shrubbery.net
Subject: Re: [rancid] Rancid help

I just did that.
The rancid-run doesn’t update the configs now.

Your suggestions would be a great help.

Thanks
Anusha

Post by Lingam, Anusha
I tried to tar/untar of old CVS. Then, rancid-run is not updating the configs everytime.

this ought to work if you 'cvs update' each group after untarring the
cvs repo.


_______________________________________________
Rancid-discuss mailing list
Rancid-***@shrubbery.net
http://www.shrubbery.net/mailman/listinfo/rancid-discuss