Discussion:
[rancid] ASSISTANCE NEEDED
bsuresh1976
2008-02-27 08:04:22 UTC
Permalink
Guys,



I am new to the RANCID. Rancid was setup by my colleague & I am the end
user. Some of the routers works fine, but on some of the routers I get the
below error.



Could some one please assist me.? I googled for an answer, but I could not
get the correct answer.



routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
routers.20080226.223517:bom01-wxbb-art01.webex.com clogin error: Error:
TIMEOUT reached
routers.20080226.223517:bom01-wxbb-art01.webex.com: missed cmd(s): dir /all
slavedisk2:,show rsp chassis-info,dir /all s
ec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,dir
/all disk2:,dir /all sec-bootflash:,show sp
e version,dir /all slaveslot2:,dir /all disk0:,show bootvar,dir /all
slaveslot0:,dir /all sec-slot1:,dir /all harddiska:
,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show variables boot,show boot,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir
/all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp
status,dir /all sup-bootflash:,dir /all slot
2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir
/all slavebootflash:,show controllers cbus,d
ir /all slaveslot1:,dir /all nvram:,show running-config,show c7200,dir /all
slot1:
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found



Regards,



Suresh
g***@r-it.at
2008-02-27 08:19:26 UTC
Permalink
Hi!

"TIMEOUT reached" just means that the device was not reachable, offline,
powered down, could have been anything.

Georg





***@hotmail.com
Gesendet von: rancid-discuss-***@shrubbery.net
27.02.2008 09:04

An
rancid-***@shrubbery.net
Kopie

Thema
[rancid] ASSISTANCE NEEDED






Guys,

I am new to the RANCID. Rancid was setup by my colleague & I am the end
user. Some of the routers works fine, but on some of the routers I get the
below error.

Could some one please assist me?? I googled for an answer, but I could not
get the correct answer?

routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
routers.20080226.223517:bom01-wxbb-art01.webex.com clogin error: Error:
TIMEOUT reached
routers.20080226.223517:bom01-wxbb-art01.webex.com: missed cmd(s): dir
/all slavedisk2:,show rsp chassis-info,dir /all s
ec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all
sec-nvram:,dir /all disk2:,dir /all sec-bootflash:,show sp
e version,dir /all slaveslot2:,dir /all disk0:,show bootvar,dir /all
slaveslot0:,dir /all sec-slot1:,dir /all harddiska:
,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show variables boot,show boot,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir
/all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show
vtp status,dir /all sup-bootflash:,dir /all slot
2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show
vlan,dir /all slavebootflash:,show controllers cbus,d
ir /all slaveslot1:,dir /all nvram:,show running-config,show c7200,dir
/all slot1:
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found

Regards,

Suresh

_______________________________________________
Rancid-discuss mailing list
Rancid-***@shrubbery.net
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss


----------------------------------------
Raiffeisen Informatik GmbH, Firmenbuchnr. 88239p, Handelsgericht Wien, DVR 0486809, UID ATU 16351908

Der Austausch von Nachrichten mit oben angefuehrtem Absender via E-Mail dient ausschliesslich Informationszwecken. Rechtsgeschaeftliche Erklaerungen duerfen ueber dieses Medium nicht ausgetauscht werden.
Correspondence with above mentioned sender via e-mail is only for information purposes. This medium may not be used for exchange of legally-binding communications.
----------------------------------------
john heasley
2008-02-27 09:54:02 UTC
Permalink
Post by g***@r-it.at
Hi!
"TIMEOUT reached" just means that the device was not reachable, offline,
powered down, could have been anything.
Georg
not quite, it appears that it got through at least the first command. So,
the login was successful and its began ok. Please see section 3 of the FAQ.
Post by g***@r-it.at
27.02.2008 09:04
An
Kopie
Thema
[rancid] ASSISTANCE NEEDED
Guys,
I am new to the RANCID. Rancid was setup by my colleague & I am the end
user. Some of the routers works fine, but on some of the routers I get the
below error.
Could some one please assist me?? I googled for an answer, but I could not
get the correct answer?
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
TIMEOUT reached
routers.20080226.223517:bom01-wxbb-art01.webex.com: missed cmd(s): dir
/all slavedisk2:,show rsp chassis-info,dir /all s
ec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all
sec-nvram:,dir /all disk2:,dir /all sec-bootflash:,show sp
e version,dir /all slaveslot2:,dir /all disk0:,show bootvar,dir /all
,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show variables boot,show boot,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir
/all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show
vtp status,dir /all sup-bootflash:,dir /all slot
2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show
vlan,dir /all slavebootflash:,show controllers cbus,d
ir /all slaveslot1:,dir /all nvram:,show running-config,show c7200,dir
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
Regards,
Suresh
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
----------------------------------------
Raiffeisen Informatik GmbH, Firmenbuchnr. 88239p, Handelsgericht Wien, DVR 0486809, UID ATU 16351908
Der Austausch von Nachrichten mit oben angefuehrtem Absender via E-Mail dient ausschliesslich Informationszwecken. Rechtsgeschaeftliche Erklaerungen duerfen ueber dieses Medium nicht ausgetauscht werden.
Correspondence with above mentioned sender via e-mail is only for information purposes. This medium may not be used for exchange of legally-binding communications.
----------------------------------------
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
bsuresh1976
2008-02-28 04:42:45 UTC
Permalink
John,



Thanks for your time... here is the issue ....



If I enable telnet on the router

Line vty 0 4

transport input telnet ssh ( I added telnet here )







The result is that it partially works, but its dead slow..



***@rancid ~]$ clogin -c "show run" bom01-wxbb-art01

bom01-wxbb-art01

spawn telnet bom01-wxbb-art01

Trying 210.4.192.33...

Connected to bom01-wxbb-art01.webex.com (210.4.192.33).

Escape character is '^]'.



Username: rancid

Password:



bom01-wxbb-art01#

bom01-wxbb-art01#term length 0 ( I pressed ctrl+c here . )

bom01-wxbb-art01#[***@rancid ~]$



If I disable telnet.



Lien vty 0 4

Transport input ssh ( I removed the telnet here )





Then the result is as below.



[***@rancid ~]$

[***@rancid ~]$ clogin -c "show run" bom01-wxbb-art01

bom01-wxbb-art01

spawn telnet bom01-wxbb-art01

Trying 210.4.192.33...

telnet: connect to address 210.4.192.33: Connection refused

spawn ssh -c 3des -x -l rancid bom01-wxbb-art01



Error: TIMEOUT reached





Please suggest whether do I need regenerate the crypto keys for ssh access?
I am able to ssh to bom01-wxbb-art01 router from putty with out any issues.



This router's brother bom01-wxbb-art02 is working fine with out any issues.





Regards



Suresh



-----Original Message-----
From: john heasley [mailto:***@shrubbery.net]
Sent: Wednesday, February 27, 2008 3:24 PM
To: ***@r-it.at
Cc: ***@hotmail.com; rancid-***@shrubbery.net
Subject: Re: [rancid] ASSISTANCE NEEDED
Post by g***@r-it.at
Hi!
"TIMEOUT reached" just means that the device was not reachable, offline,
powered down, could have been anything.
Georg
not quite, it appears that it got through at least the first command. So,

the login was successful and its began ok. Please see section 3 of the FAQ.
Post by g***@r-it.at
27.02.2008 09:04
An
Kopie
Thema
[rancid] ASSISTANCE NEEDED
Guys,
I am new to the RANCID. Rancid was setup by my colleague & I am the end
user. Some of the routers works fine, but on some of the routers I get the
below error.
Could some one please assist me?? I googled for an answer, but I could not
get the correct answer?
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
TIMEOUT reached
routers.20080226.223517:bom01-wxbb-art01.webex.com: missed cmd(s): dir
/all slavedisk2:,show rsp chassis-info,dir /all s
ec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all
sec-nvram:,dir /all disk2:,dir /all sec-bootflash:,show sp
e version,dir /all slaveslot2:,dir /all disk0:,show bootvar,dir /all
,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show variables boot,show boot,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir
/all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show
vtp status,dir /all sup-bootflash:,dir /all slot
2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show
vlan,dir /all slavebootflash:,show controllers cbus,d
ir /all slaveslot1:,dir /all nvram:,show running-config,show c7200,dir
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
Regards,
Suresh
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
----------------------------------------
Raiffeisen Informatik GmbH, Firmenbuchnr. 88239p, Handelsgericht Wien, DVR
0486809, UID ATU 16351908
Post by g***@r-it.at
Der Austausch von Nachrichten mit oben angefuehrtem Absender via E-Mail
dient ausschliesslich Informationszwecken. Rechtsgeschaeftliche Erklaerungen
duerfen ueber dieses Medium nicht ausgetauscht werden.
Post by g***@r-it.at
Correspondence with above mentioned sender via e-mail is only for
information purposes. This medium may not be used for exchange of
legally-binding communications.
Post by g***@r-it.at
----------------------------------------
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss
Lance Vermilion
2008-02-28 13:56:11 UTC
Permalink
Suresh,
bsuresh1976
2008-03-20 06:17:57 UTC
Permalink
Thanks for your suggestion. it works now. There was some routing issue.

Regards

Suresh

-----Original Message-----
From: ***@gheek.net [mailto:***@gheek.net] On Behalf Of Lance
Vermilion
Sent: Thursday, February 28, 2008 7:26 PM
To: bsuresh1976
Cc: john heasley; ***@r-it.at; rancid-***@shrubbery.net
Subject: Re: [rancid] Re: ASSISTANCE NEEDED

Suresh,
bsuresh1976
2008-02-27 09:20:13 UTC
Permalink
George,



Thanks for your quick response..



ping bom01-wxbb-art01
PING bom01-wxbb-art01.webex.com (210.4.192.33) 56(84) bytes of data.
64 bytes from bom01-wxbb-art01.webex.com (210.4.192.33): icmp_seq=1 ttl=249
time=271 ms
64 bytes from bom01-wxbb-art01.webex.com (210.4.192.33): icmp_seq=2 ttl=249
time=271 ms
64 bytes from bom01-wxbb-art01.webex.com (210.4.192.33): icmp_seq=3 ttl=249
time=271 ms

--- bom01-wxbb-art01.webex.com ping statistics ---
4 packets transmitted, 3 received, 25% packet loss, time 3003ms
rtt min/avg/max/mdev = 271.257/271.397/271.608/0.620 ms, pipe 2



The router is UP. on September it was updated, please the below attachment.









Regards,



Suresh

_____

From: ***@r-it.at [mailto:***@r-it.at]
Sent: Wednesday, February 27, 2008 1:49 PM
To: ***@hotmail.com
Cc: rancid-***@shrubbery.net; rancid-discuss-***@shrubbery.net
Subject: [rancid] ASSISTANCE NEEDED



Hi!

"TIMEOUT reached" just means that the device was not reachable, offline,
powered down, could have been anything.

Georg



----------------------------------------
Raiffeisen Informatik GmbH, Firmenbuchnr. 88239p, Handelsgericht Wien, DVR
0486809, UID ATU 16351908

Der Austausch von Nachrichten mit oben angefuehrtem Absender via E-Mail
dient ausschliesslich Informationszwecken. Rechtsgeschaeftliche Erklaerungen
duerfen ueber dieses Medium nicht ausgetauscht werden.
Correspondence with above mentioned sender via e-mail is only for
information purposes. This medium may not be used for exchange of
legally-binding communications.
----------------------------------------

Inactive hide details for ***@hotmail.combsuresh1976@hotmail.com




***@hotmail.com
Gesendet von: rancid-discuss-***@shrubbery.net

27.02.2008 09:04




An


rancid-***@shrubbery.net




Kopie






Thema


[rancid] ASSISTANCE NEEDED









Guys,

I am new to the RANCID. Rancid was setup by my colleague & I am the end
user. Some of the routers works fine, but on some of the routers I get the
below error.

Could some one please assist me.? I googled for an answer, but I could not
get the correct answer.

routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found
routers.20080226.223517:bom01-wxbb-art01.webex.com clogin error: Error:
TIMEOUT reached
routers.20080226.223517:bom01-wxbb-art01.webex.com: missed cmd(s): dir /all
slavedisk2:,show rsp chassis-info,dir /all s
ec-slot2:,show diag,dir /all disk1:,show gsr chassis,dir /all sec-nvram:,dir
/all disk2:,dir /all sec-bootflash:,show sp
e version,dir /all slaveslot2:,dir /all disk0:,show bootvar,dir /all
slaveslot0:,dir /all sec-slot1:,dir /all harddiska:
,dir /all slavenvram:,show flash,dir /all sec-disk2:,dir /all
slavesup-bootflash:,dir /all sec-disk0:,dir /all harddiskb
:,show variables boot,show boot,dir /all slavedisk1:,show module,show
controllers,show diagbus,dir /all slavedisk0:,dir
/all bootflash:,dir /all sec-slot0:,dir /all sec-disk1:,write term,show vtp
status,dir /all sup-bootflash:,dir /all slot
2:,dir /all harddisk:,dir /all slot0:,dir /all sup-microcode:,show vlan,dir
/all slavebootflash:,show controllers cbus,d
ir /all slaveslot1:,dir /all nvram:,show running-config,show c7200,dir /all
slot1:
routers.20080226.223517:bom01-wxbb-art01.webex.com: End of run not found

Regards,

Suresh
Loading...