Hi Adam,
I am seeing the same issue.
When I run rancid-run I see the following errors in the log file:
router01: vlogin error: Error: TIMEOUT reached
router01: missed cmd(s): show configuration commands
router01: End of run not found
#
Getting missed routers: round 1.
Passed argv0 into rancid-fe {
Unknown router manufacturer for {:
Manually I can run vlogin -c "show configuration commands" router01
And this pulls back the config.
Note I manually changed the vrancid file to just run the command "show configuration commands", not sure if this is the correct way to configure the commands or should I be using rancid.types.conf?
Regards
Rob
From: Adam Korab [mailto:***@ballinatta.com]
Sent: 01 April 2015 09:04
To: Antonio Querubin; Hughes,R,Robert,VIE C
Cc: rancid-***@shrubbery.net
Subject: RE: [rancid] vyatta/vyos
Hi Tony,
Having a bit of trouble with this on a fresh rancid 3.2 install and files pulled from git tonight as well. Target is a UBNT EdgeRouter Pro, v1.6.0.
I edited rancid.types.conf to append | no -more as the default 'show configuration' and 'show configuration commands' get stuffed through the less pager which resulted in a timeout. Also commented out a few that don't apply to the
However, rancid-run shows those failing:
Getting missed routers: round 4.
r01.adm: vlogin error: Error: TIMEOUT reached
r01.adm: missed cmd(s): show version all,show configuration | no-more,show system image,show configuration commands | no-more
r01.adm: End of run not found
#
ending: Wed Apr 1 02:54:38 CDT 2015
But manually running these via vlogin works fine:
[***@nms2 ~]$ vlogin -c "show version all;show configuration | no-more" r01.adm
r01.adm
spawn ssh -c 3des -x -l admin r01.adm
***@r01.adm's<mailto:***@r01.adm's> password:
Linux ubnt 3.10.20-UBNT #1 SMP Wed Oct 29 20:51:42 PDT 2014 mips64
Welcome to EdgeOS
Last login: Wed Apr 1 07:58:13 2015 from 10.16.0.15
***@r01.adm:~$<mailto:***@r01.adm:~$>
***@r01.adm:~$<mailto:***@r01.adm:~$> set terminal length 0
Invalid command
***@r01.adm:~$<mailto:***@r01.adm:~$> show version all
show configuration | no-more
Version: v1.6.0
Build ID: 4716006
Build on: 10/31/14 17:38
Copyright: 2012-2014 Ubiquiti Networks, Inc.
HW model: EdgeRouter Pro 8-Port
HW S/N: 24A43C3CF41B
Uptime: 07:59:35 up 5 days, 12:06, 1 user, load average: 0.00, 0.01, 0.05
***@r01.adm:~$<mailto:***@r01.adm:~$> show configuration | no-more
interfaces {
ethernet eth0 {
<blah blah blah>
}
***@r01.adm:~$<mailto:***@r01.adm:~$> exit
logout
Connection to r01.adm closed.
Thanks!
--Adam
-----Original Message-----
From: Rancid-discuss [mailto:rancid-discuss-***@shrubbery.net] On Behalf Of Antonio Querubin
Sent: Wednesday, February 18, 2015 6:55 AM
To: ***@bt.com<mailto:***@bt.com>
Cc: rancid-***@shrubbery.net<mailto:rancid-***@shrubbery.net>
Subject: Re: [rancid] vyatta/vyos
The vyos support now installs/runs as a module. See the README in the git repository for updated install info.
Antonio Querubin
e-mail: ***@lavanauts.org<mailto:***@lavanauts.org>
xmpp: ***@gmail.com<mailto:***@gmail.com>