[rancid] [PATCH] hlogin: turn off paging on HP ProCurve 7000dl

[Matej Vela]

Hi,

hlogin currently disables paging with "no page", which works as expected
on the 2500, 2600, 2800, and 2900 series. However, the 7000dl series
expects "terminal length 0", as documented here:

<http://www.hp.com/rnd/support/manuals/7000dl.htm>

(The Command Line Interface Reference Guide from September 2007 has this
on page 294.)

The attached patch simply sends both "no page" and "terminal length 0".
It's been included in the Debian package since March 2011:

<http://bugs.debian.org/577111>

I don't have access to a 7000dl, so perhaps someone else can provide
additional confirmation, but the other models mentioned above continue
to work fine.

Thanks,

Matej

[heasley]

Post by Matej Vela
Hi,
hlogin currently disables paging with "no page", which works as expected
on the 2500, 2600, 2800, and 2900 series. However, the 7000dl series
<http://www.hp.com/rnd/support/manuals/7000dl.htm>
(The Command Line Interface Reference Guide from September 2007 has this
on page 294.)
The attached patch simply sends both "no page" and "terminal length 0".
<http://bugs.debian.org/577111>
I don't have access to a 7000dl, so perhaps someone else can provide
additional confirmation, but the other models mentioned above continue
to work fine.

looking at that bug report, i'm guessing that setting length to 0 might
trigger a bug - we've seen that before with other vendors and foundry
nor hp tend to be very resilient. so, this should probably only send
that cmd if 'no page' fails.

however, i'd first ask from whom hp OEM'd that switch. it might be that
it would be better served as a different vendor. if it is an OEM, does
anyone know who made it?

Post by Matej Vela
Thanks,
Matej
diff -ruN rancid-2.3.8~/bin/hlogin.in rancid-2.3.8/bin/hlogin.in
--- rancid-2.3.8~/bin/hlogin.in
+++ rancid-2.3.8/bin/hlogin.in
@@ -521,11 +521,17 @@
set in_proc 1
# Turn off the pager and escape regex meta characters in the $prompt
- send "no page\r"
regsub -all {[)(]} $prompt {\\&} reprompt
regsub -all {^(.{1,11}).*([#>])$} $reprompt {\1([^#>\r\n]+)?[#>](\\([^)\\r\\n]+\\))?} reprompt
+ send "no page\r"
+ expect {
+ -re $reprompt {}
+ -re "\[\n\r]+" { exp_continue }
+ }
+ send "terminal length 0\r"
expect {
-re $reprompt {}
+ -re "Invalid input: 0\[\n\r]+" { exp_continue }
-re "\[\n\r]+" { exp_continue }
}
# this is the only way i see to get rid of more prompts in o/p..grrrrr
@@ -780,6 +786,11 @@
# disable the pager
send "no page\r"
expect -re $prompt {}
+ send "terminal length 0\r"
+ expect {
+ -re $prompt {}
+ -re "Invalid input: 0\[\n\r]+" { exp_continue }
+ }
source $sfile
catch {close};
} else {
_______________________________________________
Rancid-discuss mailing list
http://www.shrubbery.net/mailman/listinfo.cgi/rancid-discuss