[rancid] Cisco ASA 8.4.x - terminal width, width removed

[o***@gmail.com]

All,



I recently upgraded ASA code to 8.4.x and noticed Rancid no longer
collecting configuration changes from ASA. I looked around and couldn't
find solution, in the meanwhile I upgraded Rancid to 2.3.8 and I am still
unable to collect any configuration changes from ASA.



Error Summary:

***@r-svr:~$ /home/rancid/bin/clogin -c 'show clock' asa5520-fw1

asa5520-fw1

spawn ssh -c 3des -x -l user01 asa5520-fw1

***@asa5520-fw1's password:

Type help or '?' for a list of available commands.

asa5520-fw1> enable

Password: *************

asa5520-fw1#



asa5520-fw1# terminal length 0

^

ERROR: % Invalid input detected at '^' marker.



asa5520-fw1# terminal width 132

^

ERROR: % Invalid input detected at '^' marker.

asa5520-fw1# show clock

14:13:13.513 PST Wed Feb 22 2012

asa5520-fw1#exit



Logoff



Connection to asa5520-fw1 closed.

***@r-svr:



I would appreciate your feedbacks.



Regards,

Gokhan.

[shouldbe q931]

Post by o***@gmail.com
All,
I recently upgraded ASA code to 8.4.x and noticed Rancid no longer
collecting configuration changes from ASA.  I looked around and couldn’t
find solution, in the meanwhile I upgraded Rancid to  2.3.8 and I am still
unable to collect any configuration changes from ASA.

I have a completely "clean" install of rancid 2.3.8 that registers
changes on an ASA5505 running 8.4.2, granted I haven't checked the
logs for a while, but I see updates via ViewVC.

I suppose I should check the logs...

[o***@gmail.com]

Thanks everyone! I got it working.

-----Original Message-----
From: shouldbe q931 [mailto:***@gmail.com]
Sent: Wednesday, February 22, 2012 7:11 PM
To: rancid-***@shrubbery.net
Cc: ***@gmail.com
Subject: Re: [rancid] Cisco ASA 8.4.x - terminal width, width removed

Post by o***@gmail.com
All,
I recently upgraded ASA code to 8.4.x and noticed Rancid no longer
collecting configuration changes from ASA.  I looked around and
couldn’t find solution, in the meanwhile I upgraded Rancid to  2.3.8
and I am still unable to collect any configuration changes from ASA.

I have a completely "clean" install of rancid 2.3.8 that registers changes
on an ASA5505 running 8.4.2, granted I haven't checked the logs for a while,
but I see updates via ViewVC.

I suppose I should check the logs...